This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SA30CA

48.4V Clamp 10.5A Ipp Tvs Diode Through Hole DO-204AC (DO-15)

Manufacturer:

Littelfuse Inc
Mfr.Part #:

SA30CA
Datasheet:

SA30CA Datasheet (PDF)
Series:

SA
Type:

Zener
Bidirectional Channels:

1
Voltage - Reverse Standoff (Typ):

30V
EDA/CAD Models:

Request Free CAD Models for SA30CA

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SA30CA General Description

The SA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.Halogen-Free and RoHS compliantTypical maximum temperature coefficient ΔVBR= 0.1% Ã— VBR@25Â°CGlass passivated junction500W peak pulse capability at 10Ã—1000Î¼s waveform, repetition rate (duty cycles):0.01%Fast response time: typically less than 1.0ps from 0 Volts to BV minExcellent clamping capabilityLow incremental surge resistanceTypical IR less than 1Î¼A above 13VHigh temperature soldering guaranteed: 265Â°C./10 seconds/ 0.375â€,(9.5mm) lead length, 51bs., (2.3kg) tensionPlastic package has Underwriters LaboratoryFlammability classification 94V-OMatte Tin Leadâ€“free plated

Key Features

Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C × ΔT
Glass passivated chip junction in DO-15 Package
500W peak pulse capability at 10×1000μs waveform, repetition rate (duty cycles):0.01%
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Excellent clamping capability
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact).
ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
Low incremental surge resistance
Typical IR less than 1μA above 13V
High temperature soldering guaranteed: 260°C/40 seconds / 0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg) tension
Plastic package has underwriters laboratory flammability classification 94V-O
Matte tin lead–free plated
Halogen free and RoHS compliant

Application

TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.

Specifications

Category	Circuit ProtectionTransient Voltage Suppressors (TVS)TVS Diodes	Series	SA
Type	Zener	Bidirectional Channels	1
Voltage - Reverse Standoff (Typ)	30V	Voltage - Breakdown (Min)	33.3V
Voltage - Clamping (Max) @ Ipp	48.4V	Current - Peak Pulse (10/1000µs)	10.5A
Power - Peak Pulse	500W	Power Line Protection	No
Applications	General Purpose	Capacitance @ Frequency	-
Operating Temperature	-55°C ~ 175°C (TJ)	Mounting Type	Through Hole