This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

1.5SMC16A

22.5V Clamp 70A Ipp Tvs Diode Surface Mount DO-214AB (SMC)

Manufacturer:

Bourns Electronic Solutions
Mfr.Part #:

1.5SMC16A
Datasheet:

1.5SMC16A Datasheet (PDF)
feature-configuration:

Single
feature-direction-type:

Uni-Directional
feature-number-of-elements-per-chip:

1
feature-minimum-breakdown-voltage-v:

15.2
EDA/CAD Models:

Request Free CAD Models for 1.5SMC16A

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

1.5SMC16A General Description

The 1.5SMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Key Features

1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles): 0.01%
Excellent clamping capability
Low incremental surge resistance
Typical I
R
less than 1μA when V
BR
min>12V
For surface mounted applications to optimize board space
Low profile package
Built-in strain relief
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2
EFT protection of data lines in accordance with IEC 61000-4-4
Fast response time: typically less than 1.0ps from 0V to BV min
Glass passivated chip junction
High temperature to reflow soldering guaranteed: 260°C/30sec
V
BR
@ T
J
= V
BR
@25°C x (1+αT x (T
J
- 25))(αT:Temperature Coefficient, typical value is 0.1%)
Plastic package is flammability rated V-0 per Underwriters Laboratories
Meet MSL level1, per J-STD-020, LF maximum peak of 260°C
Matte tin lead–free plated
Halogen free and RoHS compliant
Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)

Application

TVS devices are ideal for the protection of I/O Interfaces, V
CC
bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.

Specifications

feature-configuration	Single	feature-direction-type	Uni-Directional
feature-number-of-elements-per-chip	1	feature-minimum-breakdown-voltage-v	15.2
feature-maximum-clamping-voltage-v	22.5	feature-maximum-reverse-stand-off-voltage-v	13.6
feature-maximum-peak-pulse-current-a	67.6	feature-maximum-reverse-leakage-current-ua	1
feature-test-current-ma	1	feature-peak-pulse-power-dissipation-w	1500
feature-packaging	Tape and Reel	feature-rad-hard
feature-pin-count	2	feature-cecc-qualified	No
feature-esd-protection	Yes	feature-military	No
feature-aec-qualified	No	feature-aec-qualified-number
feature-auto-motive	No	feature-p-pap	No
feature-eccn-code	EAR99	feature-svhc	Yes
feature-svhc-exceeds-threshold	Yes