What are the typical applications of the MCP602 and MCP6002 op-amps?

The MCP602 and MCP6002 op-amps are used in a wide range of applications, including precision amplification in instrumentation and sensor interfaces, filtering and signal conditioning in data acquisition systems, active filtering and equalization in audio circuits, voltage and current measurement circuits, signal processing in communication systems, control systems, and motor drive circuits.

Are there any differences in terms of temperature grades for the MCP602 and MCP6002?

Both op-amps are available in different temperature grades, including industrial and extended temperature ranges, making them suitable for a wide range of operating conditions.

Can the MCP602 and MCP6002 op-amps be used in low-power and battery-operated applications?

Yes, both op-amps are suitable for low-power and battery-operated applications due to their low power consumption. They are commonly used in portable and energy-efficient devices.

What are the differences in terms of power consumption between the MCP602 and MCP6002 op-amps?

Both op-amps have low power consumption, typically drawing around 270 µA of quiescent current per amplifier. Their power consumption is comparable.

What is the power supply voltage range of the MCP602 and MCP6002 op-amps?

Both the MCP602 and MCP6002 can operate from a single power supply voltage ranging from 2.5V to 6.0V. They can also operate from dual power supplies with a voltage range of ±1.25V to ±3.0V.

This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

MCP602 vs MCP6002 Op-amp: Datasheet, Features and Application

Published: Nov 03, 2023

MCP602 and MCP6002 Overview

MCP602

The MCP602 is a dual operational amplifier renowned for its high gain bandwidth product of 2.8 MHz and exceptionally low typical operating current of 230 uA. It employs Microchip's advanced CMOS technology, delivering low bias current, high-speed operation, high open-loop gain, and rail-to-rail output swing capabilities.

MCP602

The MCP602 operates efficiently with single supply voltages as low as 2.7V while drawing less than 325 uA of quiescent current per amplifier. Its versatility makes it an ideal choice for various applications, including industrial process control, low-power battery-operated devices, portable equipment, data acquisition systems, test equipment, and low-end audio applications. Available in standard 8-lead PDIP, SOIC, and TSSOP packages, the MCP602 is a dependable choice for precision and performance.

MCP6002

The MCP6002 is a dual general-purpose operational amplifier that offers the convenience of rail-to-rail input and output operations within a wide 1.8 to 6V operating voltage range. With a typical gain bandwidth product of 1 MHz and impressively low quiescent current of 100 microamperes, the MCP6002 is designed to deliver efficient and reliable performance.

MCP6002

It is available in 8-lead PDIP, SOIC, and MSOP packages, making it a compact and power-efficient choice for a range of applications. Whether you need precision amplification in low-voltage environments or space-constrained designs, the MCP6002 offers a flexible and dependable solution.

MCP602 vs MCP6002: Pinout

MCP602 Pinout

MCP602 Pinout

MCP6002 Pinout

MCP6002 Pinout

MCP602 vs MCP6002: Design Aids

MCP602

• SPICE Macro Models

• FilterLab® Software

• Mindi™ Simulation Tool

• MAPS (Microchip Advanced Part Selector)

• Analog Demonstration and Evaluation Boards

• Application Notes

MCP6002

• SPICE Macro Models

• FilterLab® Software

• Mindi™ Circuit Designer and Analog Simulator

• Microchip Advanced Part Selector (MAPS)

• Analog Demonstration and Evaluation Boards

• Application Notes

MCP602 vs MCP6002: Specifications and Features

MCP602 Specifications and Features

Specifications

Per Package: 2
GBWP: 2800 kHz
VOS Max.: 2000 uV
Supply Voltage Range: 2.7V (Min) to 6.0V (Max)
Iq Typical: 230 µA
Iq Max: 325 uA
Input Voltage Noise Density: 29 nV/√(Hz)
PSRR Min: 80 dB
CMRR Min: 75 dB
Operating Temperature Range: -40 to 125°C
Ib (Input Bias Current): 1 pA
PM (Phase Margin): 50°
Isc (Short Circuit Current): 22 mA
Slew Rate: 2.3 V/µs

Features

Ultra-Low Input Bias Current: Typically 1 pA
High Gain-Bandwidth Product: 2.8 MHz
Low Quiescent Current: Typically 230 µA per amplifier
Minimal Input Offset Voltage: Maximum of 2 mV
Maintains Unity Gain Stability
Provides Rail-to-Rail Output
Suitable for Extended Temperature Ranges

MCP6002 Specifications and Features

Specifications

Per Package: 2
GBWP: 1000 kHz (Gain Bandwidth Product)
VOS Max.: 4500 uV (Maximum Offset Voltage)
Supply Voltage Range: 1.8V (Min) to 6.0V (Max)
Iq Typical: 100 µA (Typical Quiescent Current)
Iq Max: 170 uA (Maximum Quiescent Current)
Input Voltage Noise Density: 28 nV/√(Hz)
PSRR Min: 86 dB (Minimum Power Supply Rejection Ratio)
CMRR Min: 76 dB (Minimum Common Mode Rejection Ratio)
Operating Temperature Range: -40 to 125°C
Ib (Input Bias Current): 1 pA (Input Bias Current)
PM (Phase Margin): 90° (Phase Margin)
Isc (Short Circuit Current): 23 mA (Short Circuit Current)
Slew Rate: 0.6 V/µs (Slew Rate)

Features

Gain Bandwidth Product (GBWP): 1 MHz
Typical Quiescent Current: 100 µA
Wide Supply Voltage Range: 1.8V to 6V
Supports Rail-to-Rail Input and Output
Suitable for Extended Temperature Environments
Compact Package Options Available: 8-lead PDIP, SOIC, and MSOP

MCP602 vs MCP6002: Specifications and Features

Specification / Feature	MCP602	MCP6002
Specifications
Per Package	2	2
GBWP	2800 kHz	1000 kHz
VOS Max.	2000 uV	4500 uV
Supply Voltage Range	2.7V (Min) to 6.0V (Max)	1.8V (Min) to 6.0V (Max)
Iq Typical	230 µA	100 µA
Iq Max	325 uA	170 µA
Input Voltage Noise Density	29 nV/√(Hz)	28 nV/√(Hz)
PSRR Min	80 dB	86 dB
CMRR Min	75 dB	76 dB
Operating Temperature Range	-40 to 125°C	-40 to 125°C
Ib (Input Bias Current)	1 pA	1 pA
PM (Phase Margin)	50°	90°
Isc (Short Circuit Current)	22 mA	23 mA
Slew Rate	2.3 V/µs	0.6 V/µs
Features
Ultra-Low Input Bias Current	Typically 1 pA	-
High Gain-Bandwidth Product	2.8 MHz	-
Low Quiescent Current	Typically 230 µA per amplifier	100 µA
Minimal Input Offset Voltage	Maximum of 2 mV	-
Maintains Unity Gain Stability	Yes	-
Provides Rail-to-Rail Output	Yes	Yes
Suitable for Extended Temperature Ranges	Yes	Yes
Compact Package Options	8-lead PDIP, SOIC, TSSOP	8-lead PDIP, SOIC, MSOP

MCP602 vs MCP6002: Applications

MCP602 Applications

Portable Electronics

A/D Converter Signal Conditioning

Photodiode Preamplification

Analog Filtering

Data Acquisition Systems

Laptops and Personal Digital Assistants (PDAs)

Sensor Integration

MCP6002 Applications

Automotive Applications

Portable Devices

Photodiode Amplification

Analog Filtering

Notebook Computers and PDAs

Battery-Powered Systems

MCP602 vs MCP6002: Test Circuit

MCP602 Test Circuit -- DC and AC Test

MCP602 Test Circuit -- DC and AC Test

MCP6002 Test Circuit -- AC and DC Test

MCP6002 Test Circuit -- AC and DC Test

MCP602 and MCP6002: Datasheet PDF

Check and Download MCP602 Datasheet PDF>>

Check and Download MCP6002 Datasheet PDF>>

MCP602 and MCP6002: Manufacturer

The MCP602 and MCP6002 are both manufactured by Microchip Technology Inc.

Manufacturer: Microchip Technology Inc.
Headquarters: Microchip Technology Inc. is headquartered in Chandler, Arizona, USA.

Microchip Technology Inc. is a renowned and globally recognized semiconductor company that specializes in producing a wide range of integrated circuits and microcontrollers. They offer a diverse portfolio of products that cater to various industries, including automotive, industrial, consumer electronics, and more. Microchip is known for its commitment to providing innovative and high-quality solutions for electronic design and development, making their components, such as the MCP602 and MCP6002 operational amplifiers, popular choices in many applications.

Next Industry Focus

L7805 Voltage Regulator: Pinout, Datasheet, Features and Circuits

Update Time: Nov 06, 2023 Consumer Electronics

Continue Reading →

FAQ

What are the typical applications of the MCP602 and MCP6002 op-amps?
The MCP602 and MCP6002 op-amps are used in a wide range of applications, including precision amplification in instrumentation and sensor interfaces, filtering and signal conditioning in data acquisition systems, active filtering and equalization in audio circuits, voltage and current measurement circuits, signal processing in communication systems, control systems, and motor drive circuits.

Are there any differences in terms of temperature grades for the MCP602 and MCP6002?
Both op-amps are available in different temperature grades, including industrial and extended temperature ranges, making them suitable for a wide range of operating conditions.

Can the MCP602 and MCP6002 op-amps be used in low-power and battery-operated applications?
Yes, both op-amps are suitable for low-power and battery-operated applications due to their low power consumption. They are commonly used in portable and energy-efficient devices.

What are the differences in terms of power consumption between the MCP602 and MCP6002 op-amps?
Both op-amps have low power consumption, typically drawing around 270 µA of quiescent current per amplifier. Their power consumption is comparable.

What is the power supply voltage range of the MCP602 and MCP6002 op-amps?
Both the MCP602 and MCP6002 can operate from a single power supply voltage ranging from 2.5V to 6.0V. They can also operate from dual power supplies with a voltage range of ±1.25V to ±3.0V.