Payment Method
VNQ7040AYTR
Current Limit SW 4-IN 4-OUT to 48A Automotive AEC-Q100 36-Pin PowerSSO EP T/R
-
Manufacturer:
-
Mfr.Part #:
VNQ7040AYTR
-
Datasheet:
-
Series:
VNQ7040AY
-
Qualification:
AEC-Q100
-
Technology:
Si
-
Factory Pack Quantity:
1000
Availability: 7535 PCS
Please fill in the short form below and we will provide you the quotation immediately.
VNQ7040AYTR General Description
The device is a quad channel high-side driver manufactured using the latest ST proprietary VIPower?technology and housed in a PowerSSO-36 package. The device is designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface, and to provide protection and diagnostics.The device integrates advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown with configurable latch-off.AFaultRSTpin unlatches the output in case of fault or disables the latch-off functionality.A dedicated multifunction multiplexed analog output pin delivers sophisticated diagnostic functions such as high precision proportional load current sense, supply voltage feedback and chip temperature sense, in addition to the detection of overload and short circuit to ground, short to VCCand OFF-state open-load.The device features a dedicated LED Mode.
Key Features
- AEC-Q100 qualified
- General
- Quad channel smart high-side driver with MultiSense analog
feedback - LED Mode for channel 0 and
1 - Very low standby
current - Compatible with 3 V and 5 V CMOS
outputs
- Quad channel smart high-side driver with MultiSense analog
- MultiSense diagnostic functions
- Multiplexed analog feedback
of: - Load current with high precision proportional
current mirror; - VCC supply
voltage; - TCHIP device
temperature - Overload and short to ground (power
limitation) indication - Thermal shutdown
indication - OFF-state open load
detection - Output short to VCC
detection - Sense
enable/disable
- Multiplexed analog feedback
- Protections
- Undervoltage
shutdown - Overvoltage
clamp - Load current
limitation - Self limiting of fast thermal
transients - Configurable latch-off on overtemperature
or power limitation with dedicated fault reset
pin - Loss of ground and loss of
VCC - Reverse battery through self
turn-on - Electrostatic discharge
protection
- Undervoltage
Specifications
Product Category: | Gate Drivers | Series: | VNQ7040AY |
Qualification: | AEC-Q100 | Technology: | Si |
Product Type: | Gate Drivers | Factory Pack Quantity: | 1000 |
Subcategory: | PMIC - Power Management ICs | Tags | VNQ7040, VNQ704, VNQ70, VNQ7, VNQ |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 7535 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for VNQ7040AYTR, guaranteed quotes back within 12hr.
Good modules. Arrived fast to Ukraine, in a good package.