This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

VND5E050MCJTR-E

Double channel high side driver with analog current sense for automotive applications

Manufacturer:

STMicroelectronics, Inc
Mfr.Part #:

VND5E050MCJTR-E
Datasheet:

VND5E050MCJTR-E Datasheet (PDF)
Series:

VIPower™
Switch Type:

General Purpose
Number of Outputs:

2
Ratio - InputOutput:

1:1
EDA/CAD Models:

Request Free CAD Models for VND5E050MCJTR-E

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

VND5E050MCJTR-E General Description

The VND5E050MCJ-E and VND5E050MCK-E are double channel high-side drivers manufactured using ST proprietary VIPower®M0-5 technology and housed in PowerSSO-12 and PowerSSO-24 packages. The devices are designed to drive 12 V automotive grounded loads, and to provide protection and diagnostics. They also implement a 3 V and 5 V CMOS-compatible interface for the use with any microcontroller.The devices integrate advanced protective functions such as load current limitation, inrush and overload active management by power limitation, overtemperature shut-off withauto-restart and overvoltage active clamp. A dedicated analog current sense pin is associated with every output channel providing enhanced diagnostic functions including fast detection of overload and short-circuit to ground through power limitation indication and overtemperature indication.The current sensing and diagnostic feedback of the whole device can be disabled by pulling the CS_DIS pin high to share the external sense resistor with similar devices.

Key Features

General
- Inrush current active management by power limitation
- Very low standby current
- 3.0 V CMOS compatible inputs
- Optimized electromagnetic emissions
- Very low electromagnetic susceptibility
- Compliance with European directive 2002/95/EC
- Very low current sense leakage
Diagnostic functions
- Proportional load current sense
- High-precision current sense for wide currents range
- Current sense disable
- Overload and short to ground (power limitation) indication
- Thermal shutdown indication
Protections
- Undervoltage shutdown
- Overvoltage clamp
- Load current limitation
- Self limiting of fast thermal transients
- Protection against loss of ground and loss of V_CC
- Overtemperature shutdown with auto restart (thermal shutdown)
- Reverse battery protected
- Electrostatic discharge protection

Specifications

Category	Integrated Circuits (ICs)Power Management (PMIC)Power Distribution Switches, Load Drivers	Series	VIPower™
Switch Type	General Purpose	Number of Outputs	2
Ratio - Input:Output	1:1	Output Configuration	High Side
Output Type	N-Channel	Interface	On/Off
Voltage - Load	4.5V ~ 28V	Voltage - Supply (Vcc/Vdd)	Not Required
Current - Output (Max)	19A	Rds On (Typ)	50mOhm (Max)
Input Type	Non-Inverting	Features	Auto Restart
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage	Operating Temperature	-40°C ~ 150°C (TJ)
Mounting Type	Surface Mount	Base Product Number	VND5E050
Product Category	Gate Drivers	Qualification	AEC-Q100
Moisture Sensitive	Yes	Product Type	Gate Drivers
Factory Pack Quantity	2500	Subcategory	PMIC - Power Management ICs
Technology	Si