This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

VN7007AHTR

Power Switch/Driver 1:1 N-Channel 100A OctaPAK 7+1

Manufacturer:

STMicroelectronics, Inc
Mfr.Part #:

VN7007AHTR
Datasheet:

VN7007AHTR Datasheet (PDF)
Series:

Automotive, AEC-Q100
Switch Type:

General Purpose
Number of Outputs:

1
Ratio - InputOutput:

1:1
EDA/CAD Models:

Request Free CAD Models for VN7007AHTR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

VN7007AHTR General Description

The device is a single channel high-side driver manufactured using ST proprietary VIPower®technology and housed in the Octapak package. The device is designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface, providing protection and diagnostics.The device integrates advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown.A sense enable pin allows OFF-state diagnosis to be disabled during the module low-power mode as well as external sense resistor sharing among similar devices.VN7007AH Evaluation Board.

Key Features

AEC-Q100 qualified
General
- Single channel smart high-side driver with CurrentSense analog feedback
- Very low standby current
- Compatible with 3.0 V and 5 V CMOS outputs
Diagnostic functions
- Overload and short to ground (power limitation) indication
- Thermal shutdown indication
- OFF-state open-load detection
- Output short to V_CC detection
- Sense enable/ disable
Protections
- Undervoltage shutdown
- Overvoltage clamp
- Load current limitation
- Self limiting of fast thermal transients
- Loss of ground and loss of V_CC
- Reverse battery
- Electrostatic discharge protection

Specifications

Category	Integrated Circuits (ICs)Power Management (PMIC)Power Distribution Switches, Load Drivers	Series	Automotive, AEC-Q100
Switch Type	General Purpose	Number of Outputs	1
Ratio - Input:Output	1:1	Output Configuration	High Side
Output Type	N-Channel	Interface	On/Off
Voltage - Load	4V ~ 28V	Voltage - Supply (Vcc/Vdd)	Not Required
Current - Output (Max)	100A	Rds On (Typ)	7mOhm
Input Type	Non-Inverting	Features	-
Fault Protection	Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO	Operating Temperature	-40°C ~ 150°C (TJ)
Mounting Type	Surface Mount	Base Product Number	VN7007
Max Operating Temperature	150 °C	Max Output Current	100 A
Min Operating Temperature	-40 °C	Nominal Input Voltage	13 V
Schedule B	8542390000