Payment Method
VN5050JTR-E
Single channel high side driver for automotive applications
-
Manufacturer: ST
-
Mfr.Part #: VN5050JTR-E
-
Datasheet: VN5050JTR-E Datasheet (PDF)
-
Operating Range: Automotive
-
ECCN US: EAR99
-
ECCN EU: NEC
-
Packing Type: Tape And Reel
Availability: 3427 PCS
Please fill in the short form below and we will provide you the quotation immediately.
VN5050JTR-E General Description
The VN5050J-E is a monolithic device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCCpin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). The device detects open load condition both in on and off state, when STAT_DIS is left open or driven low. Output shorted to VCCis detected in the off state.When STAT_DIS is driven high, the STATUS pin is in a high impedance condition.Output current limitation protects the device in overload condition. In case of long duration overload, the device limits the dissipated power to safe level up to thermal shut-down intervention.Thermal shutdown with automatic restart allows the device to recover normal operation as soon as fault condition disappears.
Key Features
- Main Inrush current active management by power limitation Very low stand-by current 3.0V CMOS compatible input Optimized electromagnetic emission Very low electromagnetic susceptibility In compliance with the 2002/95/EC European directive
- Protections Undervoltage shut-down Overvoltage clamp Output stuck to VCC detection Load current limitation Self limiting of fast thermal transients Protection against loss of ground and loss of VCC Thermal shut down Reverse battery protection (see Figure 27) Electrostatic discharge protection
- Diagnostic functions Open drain status output On state open load detection Off state open load detection Thermal shutdown indication
Specifications
Operating Range | Automotive | ECCN US | EAR99 |
ECCN EU | NEC | Packing Type | Tape And Reel |
Grade | Automotive |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 3427 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for VN5050JTR-E, guaranteed quotes back within 12hr.
The voltage does not write 5 v calisoyor sandin. Pek cogu 75, 80 calisti with 5 v but the rest was received. Then looked at 3 V mousse :) urun medium quality, eh iste. Instead the strip led alip is more manic to solder by cutting, or one by one. 3mm liquees would be better for circuits.