This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

V62/07609-01XE +BOM

Enhanced Product Isolated Feedback Generator

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

V62/07609-01XE
Datasheet:

V62/07609-01XE Datasheet (PDF)
UVLO Thresholds On/off (V):

3.9/3.9
Switching Frequency (max) (kHz):

5000
Features:

1% reference, Isolated feedback generator, Synchronizable
Operating Temperature Range (°C):

-55 to 125
EDA/CAD Models:

Request Free CAD Models for V62/07609-01XE

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

V62/07609-01XE General Description

The UC2901 is designed to solve many of the problems associated with closing a feedback control loop across a voltage isolation boundary. As a stable and reliable alternative to an optical coupler, UC2901 features an amplitude modulation system that allows a loop error signal to be coupled with a small RF transformer or capacitor.

The programmable, high-frequency oscillator within the UC2901 permits the use of smaller, less-expensive transformers, which can readily be built to meet the isolation requirements of todays line-operated power systems. As an alternative to RF operation, the external clock input to these devices allows synchronization to a system clock or to the switching frequency of an SMPS.

An additional feature is a status monitoring circuit that provides an active low output when the sensed error voltage is within ±10% of the reference. The DRIVERA output, DRIVERB output, and STATUS output are disabled until the input supply has reached a sufficient level to allow proper operation of the device.

Because these devices also can be used as a DC driver for optical couplers, the benefits of 4.5 V to 40 V supply operation, a 1% accurate reference, and a high-gain general-purpose amplifier offer advantages, even though an AC system may not be desired.

Key Features

Controlled Baseline
- One Assembly/Test Site, One Fabrication Site
Extended Temperature Performance of –55°C to 125°C
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree⁽¹⁾
Amplitude-Modulation System for Transformer
Coupling an Isolated Feedback Error Signal
Low-Cost Alternative to Optical Couplers
Internal 1% Reference and Error Amplifier
Internal Carrier Oscillator Usable to 5 MHz
Modulator Synchronizable to an External Clock
Loop Status Monitor

⁽¹⁾ Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

Specifications

UVLO thresholds on/off (V)	3.9/3.9	Switching frequency (max) (kHz)	5000
Features	1% reference, Isolated feedback generator, Synchronizable	Operating temperature range (°C)	-55 to 125
Vin (max) (V)	40	Device type	Isolated feedback generator
Rating	HiRel Enhanced Product	feature-type	Isolated Feedback Generator
feature-minimum-operating-supply-voltage-v	4.5	feature-maximum-operating-supply-voltage-v	40
feature-maximum-supply-current-ma	8	feature-maximum-power-dissipation-mw	1000
feature-output-current-ma	15	feature-reference-voltage-v	1.5
feature-packaging	Tape and Reel	feature-rad-hard
feature-pin-count	14	feature-cecc-qualified	No
feature-esd-protection		feature-escc-qualified
feature-military	No	feature-aec-qualified	No
feature-eccn-code	EAR99	feature-svhc	Yes
feature-svhc-exceeds-threshold	No