Payment Method
USBF129T-I/SNVAO
FLASH Memory IC 4Mbit SPI 30 MHz 8-SOIC
-
Manufacturer:
-
Mfr.Part #:
USBF129T-I/SNVAO
-
Datasheet:
-
Series:
Automotive, AEC-Q100
-
Memory Type:
Non-Volatile
-
Memory Format:
FLASH
-
Technology:
FLASH
-
EDA/CAD Models:
Availability: 6354 PCS
Please fill in the short form below and we will provide you the quotation immediately.
USBF129T-I/SNVAO General Description
USBF129, a USB Firmware memory chip, is a companion to the Microchip Automotive USB Smart Hub devices: USB84604 and USB84602. It is factory pre-programmed with version 129 of the binary firmware, which contains application firmware and default hub configuration settings. The USBF129 memory function assures proper functionality, providing for decreased development time and engineering resource, and overall faster time to market. Full custom programming alternatives are available upon request.
The USB Firmware memory family features a four-wire, SPI-compatible interface that allows for a low pin-count package, which occupies less board space and ultimately lowers total system costs. It is manufactured with proprietary,high-performance CMOS SuperFlash technology.The split-gate cell design and thick-oxide tunnelinginjector attain better reliability and manufacturabilitycompared with alternate approaches.
Key Features
- Preprogrammed with binary image129 for automotive usage. See “FlexConnect Firmware for USB84604” application note for complete feature set
- Integration with head unit systems
- First, second, and third row USB media hubs
- 512 KByte (4 Mbit) memory size
- Single Voltage Read and Write Operations- 2.7–3.6V
- Serial Interface Architecture- SPI Compatible: Mode 0 and Mode 3
- Read Support: Dual Input/Output I/O
- High Speed Clock Frequency up to 30 MHz
- Endurance: 100,000 Cycles (typical)
- Greater than 20 years Data Retention
- Active Read Current: 5 mA (typical)
- Standby Current: 5 µA (typical)
- Power-down Mode: 3µA (typical)
- Uniform 4 KByte sectors
- Uniform 64 KByte overlay blocks
- Sector-Erase Time: 40 ms (typical)
- Byte-Program Time: 4 ms/256 bytes (typical)
- Page Program Mode - 256 Bytes/Page
- End-of-Write Detection- Software polling the BUSY bit in Status Register
- Hold Pin (HOLD#)- Suspends a serial sequence to the memorywithout deselecting the device
- Write Protection (WP#)- Enables/Disables the Lock-Down function of the status register
- Software Write Protection- Write protection through Block-Protection bits instatus register
- Automotive grade 3: -40°C to +85°C
- 8-lead SOIC (150 mils)
- All devices are RoHS compliant
Specifications
Category | Integrated Circuits (ICs)MemoryMemory | Series | Automotive, AEC-Q100 |
Memory Type | Non-Volatile | Memory Format | FLASH |
Technology | FLASH | Memory Size | 4Mbit |
Memory Organization | 512K x 8 | Memory Interface | SPI |
Clock Frequency | 30 MHz | Write Cycle Time - Word, Page | 5ms |
Voltage - Supply | 2.7V ~ 3.6V | Operating Temperature | -40°C ~ 85°C (TA) |
Mounting Type | Surface Mount | Base Product Number | USBF129 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 6354 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for USBF129T-I/SNVAO, guaranteed quotes back within 12hr.