Payment Method
USB4624-1051HN-TR
Microchip Technology
-
Manufacturer:
-
Mfr.Part #:
USB4624-1051HN-TR
-
Datasheet:
-
Upstream Port:
USB 2.0 or HSIC
-
USB Speed:
USB 2.0
-
Downstream Ports:
4
-
SmartHub:
Yes
-
EDA/CAD Models:
Availability: 3363 PCS
Please fill in the short form below and we will provide you the quotation immediately.
USB4624-1051HN-TR General Description
The Microchip USB4624 is a low-power, OEM configurable, MTT (Multi-Transaction Translator) USB 2.0 hub controller with 4 downstream ports and advanced features for embedded USB applications. The USB4624 is fully compliant with the USB 2.0 Specification, USB 2.0 Link Power Management Addendum, High-Speed Inter-Chip (HSIC) USB Electrical Specification Revision 1.0, and will attach to an upstream port as a Full-Speed hub or as a Full-/Hi-Speed hub. The 4-port hub supports Low-Speed, Full-Speed, and Hi-Speed (if operating as a Hi-Speed hub) downstream devices on all of the enabled downstream (non-HSIC) ports. HSIC ports support only Hi-Speed operation.
The USB4624 has been specifically optimized for embedded systems where high performance, and minimal BOM costs are critical design requirements. Standby mode power has been minimized and reference clock inputs can be aligned to the customer’s specific application. Flexible power rail options ease integration into energy efficient designs by allowing the USB4624 to be powered in a single-source (VBUS (5V), VBAT, 3.3V) or a dual-source (VBAT + 1.8, 3.3V + 1.8) configuration. Additionally, all required resistors on the USB ports are integrated into the hub, including all series termination and pull-up/pull-down resistors on the D+ and D– pins.
The USB4624 supports both upstream battery charger detection and downstream battery charging. The USB4624 integrated battery charger detection circuitry supports the USB-IF Battery Charging (BC1.2) detection method and most Apple devices. These circuits are used to detect the attachment and type of a USB charger and provide an interrupt output to indicate charger information is available to be read from the device’s status registers via the serial interface. The USB4624 provides the battery charging handshake and supports the following USB-IF BC1.2 charging profiles:
- DCP: Dedicated Charging Port (Power brick with no data)
- CDP: Charging Downstream Port (1.5A with data)
- SDP: Standard Downstream Port (0.5A with data)
- Custom profiles loaded via SMBus or OTP
*The USBCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Key Features
- Hub Controller IC with 4 downstream ports
- Upstream port selectable between HSIC or USB 2.0
- 2 downstream HSIC ports
- USB-IF Battery Charger revision 1.2 support on up and downstream ports (DCP, CDP, SDP)
- Battery charging support for Apple® devices
- FlexConnect: Downstream port 1 able to swap with upstream port, allowing master capable devices to control other devices on the hub
- USB to I2C™/SPI bridge endpoint support
- USB Link Power Management (LPM) support
- SUSPEND pin for remote wakeup indication to host
- Start Of Frame (SOF) synchronized clock output pin
- Vendor Specific Messaging (VSM) support
- Enhanced OEM configuration options available through OTP or SMBus Slave Port
- VBUS (5V) or VBAT only operation
- 3.3V only operation
- VBAT + 1.8V operation
- 3.3V + 1.8V operation
- 48-pin (7x7mm) SQFN, RoHS compliant package
- LCD Monitors and TVs
- Multi-function USB Peripherals
- PC Motherboards
- Set-top Boxes, DVD Players, DVR/PVR
- Printers and Scanners
- PC Media Drive Bay
- Portable Hub Boxes
- Mobile PC Docking
- Embedded Systems
Specifications
Upstream Port | USB 2.0 or HSIC | USB Speed | USB 2.0 |
Downstream Ports | 4 | SmartHub | Yes |
MGMT I/F | I2C | ROM I/F | SPI |
Op Voltage (V) | 3.3 | MultiTRAK Tech | Yes |
Per-Port Switching | No | Integrated Flash Media Reader | No |
PortMap | Yes | PortSwap | Yes |
TrueSpeed | No | PHYBoost | Yes |
Temp. Range Min. | -40 | Temp. Range Max. | 85 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 3363 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for USB4624-1051HN-TR, guaranteed quotes back within 12hr.