This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

UCC27524P

5-A/5-A dual-channel gate driver with 5-V UVLO, enable, and 1-ns delay Matching

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

UCC27524P
Datasheet:

UCC27524P Datasheet (PDF)
Number of channels:

2
Power switch:

GaNFET, IGBT, MOSFET
Peak output current (A):

5
Input VCC (min) (V):

4.5
EDA/CAD Models:

Request Free CAD Models for UCC27524P

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

UCC27524P General Description

The UCC2752x family of devices are dual-channel, high-speed, low-side gate-driver devices capable of effectively driving MOSFET and IGBT power switches. Using a design that inherently minimizes shoot-through current, UCC2752x can deliver high-peak current pulses of up to 5-A source and 5-A sink into capacitive loads along with rail-to-rail drive capability and extremely small propagation delay (typically 13 ns). In addition, the drivers feature matched internal propagation delays between the two channels. These delays are very well suited for applications requiring dual-gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two channels in parallel to effectively increase current-drive capability or driving two switches in parallel with one input signal. The input pin thresholds are based on TTL and CMOS compatible low-voltage logic, which is fixed and independent of the VDD supply voltage. Wide hysteresis between the high and low thresholds offers excellent noise immunity.

The UCC2752x family provide the combination of three standard logic options dual inverting, dual noninverting, one inverting and one noninverting driver. UCC27526 features a dual input design which offers flexibility of both inverting (IN pin) and non-inverting (IN+ pin) configuration for each channel. Either IN+ or IN pin controls the state of the driver output. The unused input pin is used for enable and disable functions. For safety purpose, internal pullup and pulldown resistors on the input pins of all the devices in UCC2752x family ensure that outputs are held LOW when input pins are in floating condition. The UCC27523, UCC27524, and UCC27525 devices feature Enable pins (ENA and ENB) to have better control of the operation of the driver applications. The pins are internally pulled up to VDD for active-high logic and are left open for standard operation.

UCC2752x family of devices are available in SOIC-8 (D), MSOP-8 with exposed pad (DGN) and 3-mm × 3-mm WSON-8 with exposed pad (DSD) packages. UCC27524 is also offered in PDIP-8 (P) package. UCC27526 is only offered in 3-mm × 3-mm WSON (DSD) package.

Texas Instruments, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

Industry-Standard Pinout
Two Independent Gate-Drive Channels
5-A Peak Source and Sink-Drive Current
Independent-Enable Function for Each Output
TTL and CMOS Compatible Logic Threshold
Independent of Supply Voltage
Hysteretic-Logic Thresholds for High Noise
Immunity
Inputs and Enable Pin-Voltage Levels Not
Restricted by VDD Pin Bias Supply Voltage
4.5-V to 18-V Single-Supply Range
Outputs Held Low During VDD-UVLO, (Ensures
Glitch-Free Operation at Power up and Power
Down)
Fast Propagation Delays (13-ns Typical)
Fast Rise and Fall Times (7-ns and 6-ns Typical)
1-ns Typical Delay Matching Between Two
Channels
Two Outputs are in Parallel for Higher Drive
Current
Outputs Held Low When Inputs Floating
PDIP (8), SOIC (8), MSOP (8) PowerPAD™ and
3-mm × 3-mm WSON-8 Package Options
Operating Temperature Range of –40°C to 140°C

Specifications

Number of channels	2	Power switch	GaNFET, IGBT, MOSFET
Peak output current (A)	5	Input VCC (min) (V)	4.5
Input VCC (max) (V)	18	Features	Enable pin
Operating temperature range (°C)	-40 to 140	Rise time (ns)	7
Fall time (ns)	6	Propagation delay time (µs)	0.013
Input threshold	CMOS, TTL	Channel input logic	Dual, Non-Inverting
Input negative voltage (V)	0	Rating	Catalog
Undervoltage lockout (typ) (V)	4	Driver configuration	Dual, Non-Inverting
feature-driver-type	Low Side	feature-driver-configuration	Non-Inverting
feature-bridge-type		feature-number-of-drivers	2
feature-high-and-low-sides-dependency		feature-type	IGBT\|GaNFET\|MOSFET
feature-maximum-rise-time-ns	18	feature-maximum-fall-time-ns	10
feature-maximum-operating-frequency-khz		feature-maximum-propagation-delay-time-ns	23
feature-minimum-operating-supply-voltage-v	4.5	feature-maximum-operating-supply-voltage-v	18
feature-typical-input-low-threshold-voltage-v	1.2	feature-typical-input-high-threshold-voltage-v	2.1
feature-peak-output-current-a	5(Typ)	feature-maximum-power-dissipation-mw
feature-packaging	Tube	feature-rad-hard
feature-pin-count	8	feature-cecc-qualified	No
feature-esd-protection	Yes	feature-escc-qualified
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	EAR99
feature-svhc	No	feature-svhc-exceeds-threshold	No

Service Policies and Others

After-Sales & Settlement Related

Payment

Payment Method

TT/Wire Transfer

Paypal

Western Union

Money Gram

For alternative payment channels, please reach out to us at:

[email protected]

Shipping & Packing

Shipping Method

Fedex

UPS

DHL

NTN

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty

365-Day Product

Quality Guarantee

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

C**a 04/26/2024

Everything corresponds to the description, thank you

R**r 04/26/2022

The LAN91C111-NE electronic components I bought from Avaq exceeded my expectations in terms of quality. They function flawlessly and are definitely original and brand new. Highly recommended!

T**r 01/21/2021

Shipping is long. The goods correspond to the declared quality.

L**e 07/06/2020

19 days to transbaikal! Will not check yet, but with the kind of norms.