This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

UCC25800AQDGNQ1

Ultra-low EMI transformer driver for isolated bias supplies

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

UCC25800AQDGNQ1
Datasheet:

UCC25800AQDGNQ1 Datasheet (PDF)
Series:

Automotive, AEC-Q100
Applications:

Transformer Driver
Current - Supply:

14mA
Voltage - Supply:

9V ~ 34V
EDA/CAD Models:

Request Free CAD Models for UCC25800AQDGNQ1

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

UCC25800AQDGNQ1 General Description

The UCC25800-Q1 ultra-low EMI transformer driver integrates the switching power stage, the control, and the protection circuits to simplify isolated bias supply designs. It allows the design to utilize a transformer with higher leakage inductance, but much smaller parasitic primary-to-secondary capacitance. This low-capacitance transformer design enables an order of magnitude reduction in the common-mode current injection through the bias transformer. This makes the transformer driver an ideal solution for the isolated bias supply in various automotive applications to minimize the EMI noise caused by the high-speed switching devices. The soft-switching feature further reduces the EMI noise.

The transformer driver has a programmable frequency range of 100 kHz to 1.2 MHz. This high switching frequency reduces the transformer size and footprint, as well as the overall cost of the bias supply. The integrated SYNC function allows the system bias supplies to synchronize with an external clock signal, further reducing the system level noise.

The dead-time adjusts automatically to minimize the conduction loss and simplify the design. The programmable maximum dead-time ensures power stage design flexibility.

With the integrated, low-resistance switching power stage, the transformer driver can achieve a 6-W design with 24-V input, and up to 9-W from 34-V input. With a fixed input voltage, the open-loop control also helps the output regulation to remain ±5% when the load is above 10%.

The programmable overcurrent protection (OCP) allows flexibility on the power stage design to minimize the transformer size. The protection features such as adjustable OCP, input OVP, TSD and the protection from pin faults ensure robust operation. A fixed 1.5-ms soft-start period reduces the inrush current during start-up and fault recovery.

The transformer driver also provides a dedicated multi-function pin for external disabling, and fault code reporting. The fault code reporting sends the fault code once the bias supply is in the protection mode.

The UCC25800-Q1 transformer driver is offered in an 8-pin DGN package with the thermal pad to enhance its thermal handling capability.

Texas Instruments, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

High-efficiency half-bridge transformer driver
Ultra-low EMI with low interwinding capacitance
Smaller and lower-cost transformer
- Programmable frequency: 0.1 MHz to 1.2 MHz
Wide input voltage range: 9 V to 34 V
- 9 W from 34-V input
- 6 W from 24-V input
- 4 W from 15-V input
Automatic dead-time adjustment with maximum dead-time programming
External clock synchronization for low noise
Robust protection features
- Undervoltage lockout (UVLO)
- Programmable over-current protection (OCP)
- Input overvoltage protection (OVP)
- Over temperature protection (TSD)
- Integrated soft-start to reduce in-rush current
- External disable function with fault-code output
AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, T A
Functional Safety-Capable
- Documentation available to aid functional safety system design
8-Pin DGN package with thermal pad

Specifications

Category	Integrated Circuits (ICs)Power Management (PMIC)Power Management - Specialized	Series	Automotive, AEC-Q100
Applications	Transformer Driver	Current - Supply	14mA
Voltage - Supply	9V ~ 34V	Operating Temperature	-40°C ~ 125°C (TA)
Mounting Type	Surface Mount	Base Product Number	UCC25800