This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TW9900-TA1-GR +BOM

NTSC/PAL/SECAM Video Decoder IC Cell Phone 32-TQFP (5x5)

Manufacturer:

Renesas Electronics Corporation
Mfr.Part #:

TW9900-TA1-GR
Datasheet:

TW9900-TA1-GR Datasheet (PDF)
Type:

NTSC/PAL/SECAM Video Decoder
Applications:

Cell Phone
Voltage - Supply, Analog:

1.8V, 3.3V
Voltage - Supply, Digital:

1.8V, 3.3V
EDA/CAD Models:

Request Free CAD Models for TW9900-TA1-GR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TW9900-TA1-GR General Description

The TW9900-TA1-GR sets a new standard in efficiency and performance as a video decoder chip tailored for portable applications. Consuming less than 100mW in typical composite input scenarios, this chip offers significant power savings for devices, extending their battery life. Using a 1.8V analog and digital supply voltage, along with 3.3V for I/O power, ensures reliable and consistent operation. With a single 27MHz crystal, the TW9900 effortlessly decodes all analog video standards, simplifying the design process for manufacturers. The advanced synchronization processing circuitry delivers stable picture quality even with non-standard or weak signals, enhancing the overall viewing experience. Additionally, the 2-wire serial host interface facilitates seamless system integration and control over all functions, making it a versatile solution for portable device manufacturers

Key Features

NTSC (M, 4.43) and PAL (B, D, G, H, I, M, N, N combination), PAL (60), SECAM support with automatic format detection
Software selectable analog inputs allow any of the following combinations, e.g., 2 CVBS or 1 Y/C
Built-in analog anti-alias filter
Two 10-bit ADCs and analog clamping circuit
Fully programmable static gain or automatic gain control for the Y-channel
Programmable white peak control for the Y-channel
4-H adaptive comb filter Y/C separation
PAL delay line for color phase error correction
Image enhancement with peaking and CTI
Digital subcarrier PLL for accurate color decoding
Digital horizontal PLL for synchronization processing and pixel sampling
Advanced synchronization processing and sync detection for handling nonstandard and weak signal
Programmable hue, brightness, saturation, contrast, and sharpness
Automatic color control and color killer
Chroma IF compensation
Detection of level of copy protection according to Macrovision standard
ITU-R 601 or ITU-R 656 compatible YCbCr(4:2:2) output format
VBI slicer supporting industrial standard data services
VBI data pass through, raw ADC data output
Programmable output cropping
Two-wire MPU serial bus interface
Supports real time control interface
Power save and power-down mode
Typical power consumption <100mW
Single 27MHz crystal for all standards
Supports 24.54MHz and 29.5MHz crystal for high resolution square pixel format decoding
3.3V tolerant I/O
1.8V/3.3V power supply
32 Ld TQFP and 32 Ld QFN package

Specifications

Type	NTSC/PAL/SECAM Video Decoder	Applications	Cell Phone
Voltage - Supply, Analog	1.8V, 3.3V	Voltage - Supply, Digital	1.8V, 3.3V
Mounting Type	Surface Mount	Base Product Number	TW9900