This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TUSB4020BIPHPR

Two-Port High-Speed 480Mbps USB 2.0 Hub

Manufacturer:

TI
Mfr.Part #:

TUSB4020BIPHPR
Datasheet:

TUSB4020BIPHPR Datasheet (PDF)
Function:

USB2
USB speed (MBits):

480
Type:

Hub
Supply voltage (V):

1.1, 3.3
EDA/CAD Models:

Request Free CAD Models for TUSB4020BIPHPR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TUSB4020BIPHPR General Description

The TUSB4020BI is a two-port USB 2.0 hub. It provides USB high-speed/full-speed connections on the upstream port and provides high-speed, full-speed, or low-speed connections on the two downstream ports. When the upstream port is connected to an electrical environment that supports high-speed and full-speed/low-speed connections, high-speed and full-speed/low-speed USB connectivity is enabled on the downstream ports. When the upstream port is connected to an electrical environment that only supports full-speed/low-speed connections, high-speed connectivity are disabled on the downstream ports.

The TUSB4020BI supports per port or ganged power switching and overcurrent protection.

An individually port power controlled hub switches power on or off to each downstream port as requested by the USB host. Also when an individually port power controlled hub senses an over-current event, only power to the affected downstream port will be switched off.

A ganged hub switches on power to all its downstream ports when power is required to be on for any port. The power to the downstream ports is not switched off unless all ports are in a state that allows power to be removed. Also when a ganged hub senses an overcurrent event, power to all downstream ports will be switched off.

The TUSB4020BI downstream ports provide support for battery charging applications by providing battery charging connected downstream port (CDP) handshaking support. It also supports a dedicated charging port (DCP) mode when the upstream port is not connected. The DCP mode supports USB devices which support the USB Battery Charging and the Chinese Telecommunications Industry Standard YD/T 1591-2009. In addition, an automatic mode provides transparent support for BC devices and devices supporting Divider Mode charging solutions when the upstream port is unconnected.

The TUSB4020BI provides terminal strap configuration for some features including battery charging support, and also provides customization though OTP ROM, I²C EEPROM or through an I²C/SMBus slave interface for PID, VID, and custom port and phy configurations. Custom string support is also available when using an I²C EEPROM or the I²C/SMBus slave interface.

The device is available in a 48-pin HTQFP package and is offered in an industrial version for operation over the temperature range of –40°C to 85°C.

Key Features

Two-port USB 2.0 hub
USB 2.0 hub features:
- Multi-transaction translator (MTT) hub: two transaction translators
- Four asynchronous endpoint buffers per transaction translator
Type C compatible
Supports battery charging
- CDP mode (upstream port connected)
- DCP mode (upstream port unconnected)
- DCP mode complies with chinese telecommunications industry standard YD/T 1591-2009
- D+/D– divider mode
Per port or ganged power switching and overcurrent notification inputs
OTP ROM, serial EEPROM, or I²C/SMBus slave interface for custom configurations:
- VID and PID
- Port customizations
- Manufacturer and product strings (not by OTP ROM)
- Serial number (not by OTP ROM)
Application feature selection using terminal selection or EEPROM/ or I²C/SMBus slave interface
Provides 128-bit universally unique identifier (UUID)
Supports on-board and in-system OTP/EEPROM programming through the USB 2.0 upstream port
Single clock input, 24-MHz crystal or oscillator
No special driver requirements; works seamlessly on any operating system with USB stack support
48-Pin HTQFP package (PHP)