Payment Method
TUSB1210BRHBT
High-speed 480-Mbps USB 2.0 OTG transceiver
-
Manufacturer:
-
Mfr.Part #:
TUSB1210BRHBT
-
Datasheet:
-
Type:
Transceiver
-
Protocol:
USB 2.0
-
Number of Drivers/Receivers:
1/1
-
Duplex:
Half
-
EDA/CAD Models:
Availability: 4049 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TUSB1210BRHBT General Description
The TUSB1210 is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps, and low-speed 1.5 Mbps), and is compliant to both host and peripheral modes. The device additionally supports a UART mode and legacy ULPI serial modes. TUSB1210 also supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including HNP and SRP.
The DP/DM external component compensation in the transmitter compensates for variations in the series impendence in order to match with the data line impedance and the receiver input impedance, to limit data reflections and thereby improve eye diagrams.
Key Features
- USB2.0 PHY transceiver chip, designed to interface with a USB controller through a ULPI interface, fully compliant with:
- Universal serial bus specification Rev. 2.0
- On-the-go supplement to the USB 2.0 specification Rev. 1.3
- UTMI+ low pin interface (ULPI) specification Rev. 1.1
- ULPI 12-pin SDR interface
- DP/DM line external component compensation (patent #US7965100 B1)
- Interfaces to host, peripheral and OTG device cores; optimized for portable devices or system ASICs with built-in USB OTG device core
- Complete USB OTG physical front-end that supports host negotiation protocol (HNP) and session request protocol (SRP)
- VBUS overvoltage protection circuitry protects VBUS pin in range –2 V to 20 V
- Internal 5-V short-circuit protection of DP, DM, and ID pins for cable shorting to VBUS pin
- ULPI interface:
- I/O interface (1.8 V) optimized for nonterminated 50 Ω line impedance
- ULPI CLOCK pin (60 MHz) supports input and output clock configurations
- Fully programmable ULPI-compliant register set
- Full industrial grade operating temperature range from –40°C to 85°C
- Available in a 32-pin quad flat no lead [QFN (RHB)] package
Specifications
Category | Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers | Series | - |
Type | Transceiver | Protocol | USB 2.0 |
Number of Drivers/Receivers | 1/1 | Duplex | Half |
Receiver Hysteresis | 50 mV | Data Rate | 480Mbps |
Voltage - Supply | 2.7V ~ 4.8V | Operating Temperature | -40°C ~ 85°C |
Mounting Type | Surface Mount | Base Product Number | TUSB1210 |
Product Category | USB Interface IC | Product | USB Transceivers |
Mounting Style | SMD/SMT | Standard | USB OTG |
Speed | High Speed (HS) | Supply Voltage - Min | 1.71 V |
Supply Voltage - Max | 1.98 V | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Moisture Sensitive | Yes |
Operating Supply Voltage | 3.6 V | Product Type | USB Interface IC |
Factory Pack Quantity | 250 | Subcategory | Interface ICs |
Unit Weight | 0.002547 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 4049 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TUSB1210BRHBT, guaranteed quotes back within 12hr.
Top Sellers
-
SN65HVD230DR
TI
1000+ $0.403
-
SN75176BP
Texas Instruments
1000+ $0.309
-
PCF8574AN
TI
8-bit 2.5- to 5.5-V I2C/SMBus I/O expander with interrupt
-
MAX232N
Texas Instruments
Dual Transmitter/Receiver RS-232 16-Pin PDIP Tube
-
TCA6424RGJR
Texas Instruments, Inc
24-bit translating 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
Good product.Recommended