This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TUSB1002ARGET

USB3.2 10 Gbps Dual-channel Linear Redriver

Manufacturer:

TI
Mfr.Part #:

TUSB1002ARGET
Datasheet:

TUSB1002ARGET Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
ECCN Code:

EAR99
EDA/CAD Models:

Request Free CAD Models for TUSB1002ARGET

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TUSB1002ARGET General Description

The TUSB1002A is the industry’s first dual-channel USB 3.2 x1 SuperSpeedPlus (SSP) redriver and signal conditioner. The device offers low power consumption on a 3.3-V supply with its ultra-low-power architecture. It supports the USB3.2 low power modes which further reduces idle power consumption.

The TUSB1002A implements a linear equalizer, supporting up to 16 dB of loss due to Inter-Symbol Interference (ISI). When USB signals travel across a PCB or cable, signal integrity degrades due to loss and inter-symbol interference. The linear equalizer compensates for the channel loss, and thereby, extends the channel length and enables systems to pass USB compliance. The dual lane implementation and small package size provides flexibility in the placement of the TUSB1002A in the USB3.2 path.

The TUSB1002A is available in either a 24-pin 4 mm x 4 mm VQFN. It is also available in a commercial grade (TUSB1002A) or industrial grade (TUSB1002AI).

Key Features

Supports USB3.2 x1 SuperSpeed (5 Gbps) and SuperSpeedPlus (10 Gbps)
Supports PCI Express Gen3, SATA Express, and SATA Gen3.
Ultra Low-Power Architecture
- Active: < 300 mW
- Disconnect/U2/U3: < 1.9 mW
- Shutdown: < 700 µW
Adjustable Voltage Output Swing Linear Range up to 1200 mVpp
No Host/Device Side Requirement
16 Settings for up to 16 dB at 10 Gbps of Linear Equalization
Adjustable DC Equalization Gain
Hot-Plug Capable
Pin-to-Pin Compatible With LVPE502A and LVPE512 USB 3.0 Redriver
Pin-to-Pin Compatible with TUSB1002 Redriver
Temperature Range: 0°C to 70°C (Commercial) and –40°C to 85°C (Industrial)
±5 kV HBM ESD
Available in Single 3.3 V Supply.
Available in 4 mm x 4 mm VQFN

Specifications

Source Content uid	TUSB1002ARGET	Pbfree Code	Yes
Part Life Cycle Code	Active	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.39.00.01
Differential Output	YES	Driver Number of Bits	2
Input Characteristics	DIFFERENTIAL	Interface IC Type	LINE TRANSCEIVER
JESD-30 Code	S-PQCC-N24	Moisture Sensitivity Level	1
Number of Channels	2	Number of Functions	2
Number of Terminals	24	Peak Reflow Temperature (Cel)	260
Receiver Number of Bits	2	Surface Mount	YES
Temperature Grade	COMMERCIAL	Terminal Finish	NICKEL PALLADIUM GOLD
Terminal Form	NO LEAD	Terminal Position	QUAD
Time@Peak Reflow Temperature-Max (s)	30	Type	Redriver
Function	USB 3.0	USB speed (MBits)	10000
Number of channels	2	Supply voltage (max) (V)	3.6
Supply voltage (min) (V)	3	Input/output voltage (min) (V)	-0.5
Input/output voltage (max) (V)	4	Configuration	Dual-channel, Dual-lane
Features	High Performance Low Power USB 3.1 Gen 2 10G Redriver	Rating	Catalog
Operating temperature range (°C)	-40 to 85, 0 to 70	Supply current (max) (µA)	100000
ESD HBM (typ) (kV)	5	Bandwidth (MHz)	5000