This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TPS92691PWPR

LED Driver IC 1 Output DC DC Controller Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 16-HTSSOP

Manufacturer:

TI
Mfr.Part #:

TPS92691PWPR
Datasheet:

TPS92691PWPR Datasheet (PDF)
Input voltage type:

DC/DC
Topology:

Boost, Buck, Buck-Boost, Cuk, Flyback, SEPIC
Vin (min) (V):

4.5
Vin (max) (V):

65
EDA/CAD Models:

Request Free CAD Models for TPS92691PWPR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TPS92691PWPR General Description

The TPS92691/-Q1 is a versatile LED controller that can support a range of step-up or step-down driver topologies. The device implements a fixed-frequency peak current mode control technique with programmable switching frequency, slope compensation, and soft-start timing. It incorporates a high voltage (65-V) rail-to-rail current sense amplifier that can directly measure LED current using either a high-side or a low-side series sense resistor. The amplifier is designed to achieve low input offset voltage and attain better than ±3% LED current accuracy over junction temperature range of 25°C to 140°C and output common-mode voltage range of 0 to 60 V.

LED current can be independently modulated using either analog or PWM dimming techniques. Linear analog dimming response with 15:1 range is obtained by varying the voltage from 140 mV to 2.25 V across the high impedance analog adjust (IADJ) input. PWM dimming of LED current is achieved by modulating the PWM input pin with the desired duty cycle and frequency. Optional DDRV gate driver output can be used to enable series FET dimming functionality to get over 1000:1 contrast ratio.

The TPS92691/-Q1 supports continuous LED status check through the current monitor (IMON) output. This allows for LED short circuit or open circuit detection and protection. Additional fault protection features include VCC UVLO, output OVP, switch cycle-by-cycle current limit, and thermal protection.

Key Features

Wide Input Voltage: 4.5 V to 65 V
Wide Output Voltage Range: 2 V to 65 V
Low Input Offset Rail-to-Rail Current Sense Amplifier
- Better than ±3% LED Current Accuracy over 25°C to 140°C Junction Temperature Range
- Compatible With High-Side and Low-Side Current Sense Implementations
High-Impedance Analog LED Current Adjust Input (IADJ) With over 15:1 Contrast Ratio
Over 1000:1 Series FET PWM Dimming Ratio With Integrated Series N-Channel Dim Driver Interface
Continuous LED Current Monitor Output for System Fault Detection and Diagnoses
Programmable Switching Frequency With External Clock Synchronization Capability
Programmable Soft-Start and Slope Compensation
Comprehensive Fault Protection Circuitry Including VCC Undervoltage Lockout (UVLO), Output Overvoltage Protection (OVP), Cycle-by-Cycle Switch Current Limit, and Thermal Protection
TPS92691-Q1: Automotive Q100 Grade 1 Qualified

Specifications

Input voltage type	DC/DC	Topology	Boost, Buck, Buck-Boost, Cuk, Flyback, SEPIC
Vin (min) (V)	4.5	Vin (max) (V)	65
Vout (max) (V)	65	Vout (min) (V)	3
Iout (max) (A)	5	Iq (typ) (mA)	1.5
Features	Adjustable Switch Frequency, Synchronization Pin, Thermal shutdown	Operating temperature range (°C)	-40 to 125
Dimming method	Analog, PWM	Number of channels	1
Rating	Catalog