This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TPS650241QRHBRQ1

Automotive 1.5V to 6.5V, 3 Buck & 3 LDO Power Management IC

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

TPS650241QRHBRQ1
Datasheet:

TPS650241QRHBRQ1 Datasheet (PDF)
Series:

Automotive, AEC-Q100
Function:

Power Management
Battery Chemistry:

Lithium Ion/Polymer
Number of Cells:

1
EDA/CAD Models:

Request Free CAD Models for TPS650241QRHBRQ1

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TPS650241QRHBRQ1 General Description

The TPS65024x are integrated Power Management ICs for applications powered by one Li-Ion or Li-Polymer cell, which require multiple power rails. The TPS65024x provide three highly efficient, step-down converters targeted at providing the core voltage, peripheral, I/O and memory rails in a processor based system. All three step-down converters enter a low power mode at light load for maximum efficiency across the widest possible range of load currents. The converters can be forced into fixed frequency PWM mode by pulling the MODE pin high. The TPS65024x also integrate two general purpose 200-mA LDO voltage regulators, which are enabled with an external input pin. Each LDO operates with an input voltage range between 1.5 V and 6.5 V, allowing them to be supplied from one of the step-down converters or directly from the battery. The output voltage of the LDOs can be set with an external resistor divider for maximum flexibility. Additionally there is a 30-mA LDO typically used to provide power in a processor based system to a voltage rail that is always on. TPS65024x provide voltage scaling on DCDC3 using the DEFDCDC3 pin. This pin either needs to be connected to a logic HIGH or logic LOW level to set the output voltage of DCDC3. TPS65024x come in a small 5-mm × 5-mm 32-pin QFN package (RHB).

Texas Instruments, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

Qualified for Automotive Applications
1.6-A, 1.0-A or 0.8-A, 97% Efficient Step-Down
Converter for System Voltage (VDCDC1)
- 3.3-V or 2.80-V or Adjustable
1.6-A, 1.0-A or 0.8-A, up to 95% Efficient
Step-Down Converter for Memory Voltage (VDCDC2)
- 1.8 V or 2.5 V or Adjustable
0.8-A 90% Efficient Step-Down Converter for
Processor Core (VDCDC3)
Three Selectable Voltages for VDCDC3
- TPS650241
  - DEFDCDC3 = LOW: V_O = 0.9 V
  - DEFDCDC3 = HIGH: V_O = 1.375 V
- TPS650243
  - DEFDCDC3 = LOW: V_O = 1.0 V
  - DEFDCDC3 = HIGH: V_O = 1.2 V
- TPS650244
  - DEFDCDC3 = LOW: V_O = 1.55 V
  - DEFDCDC3 = HIGH: V_O = 1.6 V
30-mA LDO for Vdd_alive
Two 200-mA General Purpose LDOs (LDO1 and LDO2)
Dynamic Voltage Management for Processor Core
LDO1 and LDO2 Voltage Externally Adjustable
Separate Enable Pins for Inductive Converters
2.25-MHz Switching Frequency
85-µA Quiescent Current
Thermal Shutdown Protection
APPLICATIONS
- PDA
- Cellular/Smart Phone
- GPS
- Digital Still Camera
- Split Supply DSP and Microprocessor Solutions:
  Samsung ARM-Based Processors, etc.

Specifications

Category	Integrated Circuits (ICs)Power Management (PMIC)Battery Management	Series	Automotive, AEC-Q100
Function	Power Management	Battery Chemistry	Lithium Ion/Polymer
Number of Cells	1	Fault Protection	Over Temperature, Under Voltage
Interface	-	Operating Temperature	-40°C ~ 125°C (TA)
Mounting Type	Surface Mount	Base Product Number	TPS650241