This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TPS61194PWPRQ1

Low-EMI, high-performance 4-channel LED driver for Automotive lighting

Manufacturer:

TI
Mfr.Part #:

TPS61194PWPRQ1
Datasheet:

TPS61194PWPRQ1 Datasheet (PDF)
Number of channels:

4
Topology:

Boost with Current Sink, SEPIC
Rating:

Automotive
Operating temperature range (°C):

-40 to 125
EDA/CAD Models:

Request Free CAD Models for TPS61194PWPRQ1

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TPS61194PWPRQ1 General Description

The TPS61194-Q1 is an automotive high-efficiency, low-EMI, easy-to-use LED driver with integrated DC-DC converter. The DC-DC converter supports both boost and SEPIC mode operation. The device has four high-precision current sinks that can be combined for higher current capability.

The DC-DC converter has adaptive output voltage control based on the LED current sink headroom voltages. This feature minimizes the power consumption by adjusting the voltage to the lowest sufficient level in all conditions. For EMI reduction DC-DC supports spread spectrum for switching frequency and an external synchronization with dedicated pin. A wide-range adjustable frequency allows the TPS61194-Q1 to avoid disturbance for AM radio band.

The input voltage range for the TPS61194-Q1 is from 4.5 V to 40 V to support automotive stop/start and load dump condition. The TPS61194-Q1 integrates extensive fault detection features.

Key Features

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
Input Voltage Operating Range 4.5 V to 40 V
Four High-Precision Current Sinks
- Current Matching 1% (Typical)
- LED String Current up to 100 mA per Channel
- Outputs can be Combined Externally for Higher Current per String
High Dimming Ratio of 10 000:1 at 100 Hz
Integrated Boost/SEPIC Converter for LED String Power
- Output Voltage up to 45 V
- Switching Frequency 300 kHz to 2.2 MHz
- Switching Synchronization Input
- Spread Spectrum for Lower EMI
Extensive Fault Detection Features
- Fault Output
- Input Voltage OVP and UVLO
- Open and Shorted LED Fault Detection
- Thermal Shutdown
Minimum Number of External Components

Specifications

Number of channels	4	Topology	Boost with Current Sink, SEPIC
Rating	Automotive	Operating temperature range (°C)	-40 to 125
Vin (min) (V)	4.5	Vin (max) (V)	40
Vout (min) (V)	6	Vout (max) (V)	40
Iout (max) (A)	0.4	Iq (typ) (mA)	5
Switching frequency (max) (kHz)	2200	Features	Boost Sync, Global dimming, Spread Spectrum