Payment Method
TPS60250RTET +BOM
High efficiency charge pump for 7 WLEDs with I2C interface with 0x77 I2C slave address
-
Manufacturer:
Texas Instruments
-
Mfr.Part #:
TPS60250RTET
-
Datasheet:
-
Series:
TPS60250
-
Mounting Style:
SMD/SMT
-
Number of Outputs:
7 Output
-
Output Current:
230 mA
Availability: 7656 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TPS60250RTET General Description
The TPS60250/2 are high efficiency, constant frequency charge pump DC/DC converters that use dual mode 1× and 1.5× conversions to maximize efficiency over the input voltage range. The devices drive up to five white LEDs for the main display and up to two white LEDs for the sub display with regulated constant current for uniform intensity. By utilizing adaptive 1×/1.5× charge pump modes and very low-dropout current regulators, the TPS60250/2 achieve high efficiency over the full 1-cell lithium-battery input voltage range.
Four enable inputs, ENmain, ENsub1, ENsub2, and ENaux, available through the I2C, are used for simple on/off controls for the independent main, sub1, sub2, and DM5 displays, respectively. To lower the operating current when using one sub display LED, the devices provide completely separate operation for the sub display LEDs.
The TPS60250/2 are available in a 16-pin 3mm x 3mm thin QFN.
Key Features
- 3.0 V to 6.0 V Input Voltage Range
- ×1 and ×1.5 Charge Pump
- Fully Programmable Current with I2C
- 64 Dimming Steps with 25mA Maximum (Sub and Main Display Banks)
- 4 Dimming Steps with 80mA Maximum (DM5 for Auxiliary Application)
- 2% Current Matching for Sub LEDs at Light Load Condition (Each 100µA)
- 750 kHz Charge Pump Frequency
- Continuous 230mA Maximum Output Current
- Auto Switching Between ×1 and ×1.5 Mode for Maximum Efficiency
- Built-in Soft Start and Current Limit
- Open Lamp Detection
- 16-Pin 3mm x 3mm QFN
- TPS60250 (I2C Slave Address: 1110111)
- TPS60252 (I2C Slave Address: 1110110)
- APPLICATIONS
- Cellular Phones
- PDA, PMP, GPS (Up To 4 Inch LCD Display)
- Multidisplay Handheld Devices
Specifications
Product Category | LED Lighting Drivers | Series | TPS60250 |
Mounting Style | SMD/SMT | Number of Outputs | 7 Output |
Output Current | 230 mA | Input Voltage, Min | 3 V |
Input Voltage, Max | 6 V | Topology | Charge Pump |
Operating Frequency | 750 kHz | Output Voltage | 6.5 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Features | Charge Pump, I2C Control, Soft Start, Open LED Detection | Development Kit | TPS60250EVM-185 |
High Level Output Current | 230 mA | Input Voltage | 3 V to 6 V |
Moisture Sensitive | Yes | Number of Channels | 7 Channel |
Output Type | Current Mode | Pd - Power Dissipation | 821 mW |
Product Type | LED Lighting Drivers | Factory Pack Quantity | 250 |
Subcategory | Driver ICs | Supply Current - Max | 6.7 mA |
Type | Capacitive | Unit Weight | 0.007055 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,656
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TPS60250RTET, guaranteed quotes back within 12hr.