This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TPS24710DGS

Hot Swap Controller 1 Channel General Purpose 10-VSSOP

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

TPS24710DGS
Datasheet:

TPS24710DGS Datasheet (PDF)
Type:

Hot Swap Controller
Number of Channels:

1
Internal Switch(s):

No
Applications:

General Purpose
EDA/CAD Models:

Request Free CAD Models for TPS24710DGS

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TPS24710DGS General Description

The TPS24710/11/12/13 is an easy-to-use, 2.5 V to 18 V, hot-swap controller that safely drives an external N-channel MOSFET. The programmable current limit and fault time protect the supply and load from excessive current at startup. After startup, currents above the user-selected limit will be allowed to flow until programmed timeout – except in extreme overload events when the load is immediately disconnected from source. The low, 25mV current sense threshold is highly accurate and allows use of smaller, more efficient sense resistors yielding lower power loss and smaller footprint.

Programmable power limiting ensures the external MOSFET operates inside its safe operating area (SOA) at all times. This allows the use of smaller MOSFETS while improving system reliability. Power good and fault outputs are provided for status monitoring and downstream load control.

Texas Instruments, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

2.5-V to 18-V Operation
Accurate Current Limiting for Startup
Programmable FET SOA Protection
Accurate 25-mV Current-Sense Threshold
Power-Good Output
Fast Breaker for Short-Circuit Protection
Programmable Fault Timer
Programmable UV Threshold
Drop-In Upgrade for LTC4211 – No Layout
Changes
PG, FLT Active-High and Active-Low Versions
MSOP-10 Package

Specifications

Category	Integrated Circuits (ICs)Power Management (PMIC)Hot Swap Controllers	Series	-
Type	Hot Swap Controller	Number of Channels	1
Internal Switch(s)	No	Applications	General Purpose
Features	Latched Fault, Thermal Limit	Programmable Features	Current Limit, Fault Timeout, UVLO
Voltage - Supply	2.5V ~ 18V	Current - Output (Max)	-
Operating Temperature	-40°C ~ 85°C	Current - Supply	1 mA
Mounting Type	Surface Mount	Base Product Number	TPS24710
FET	External	Vin (min) (V)	2.5
Vin (max) (V)	18	Vabsmax_cont (V)	30
Current limit (min) (A)	0.01	Current limit (max) (A)	500
Overcurrent response	Circuit breaker, current limiting	Fault response	Latch-off
Soft start	Adjustable	Rating	Catalog
Device type	eFuses and hot swap controllers	Operating temperature range (°C)	-40 to 85
Function	Adjustable current limit, Inrush current control, Power good signal, Short circuit protection	Pin Count	10
Released Date	Sep 15, 2021	Last Modified Date	Mar 7, 2023 4:10 PM UTC