Payment Method
TPIC8101DWR
Vibration and Engine Knock Sensor Interface
-
Manufacturer:
-
Mfr.Part #:
TPIC8101DWR
-
Datasheet:
-
Series:
Automotive, AEC-Q100
-
Programmable:
Not Verified
-
Type:
Sensor Interface
-
Input Type:
Serial
-
EDA/CAD Models:
Availability: 6404 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TPIC8101DWR General Description
The TPIC8101 is a dual-channel signal processing IC for detection of premature detonation in combustion engine. The two sensor channels are selectable through the SPI bus. The knock sensor typically provides an electrical signal to the amplifier inputs. The sensed signal is processed through a programmable band-pass filter to extract the frequency of interest (engine knock or ping signals). The band-pass filter eliminates any engine background noise associated with combustion. The engine background noise is typically low in amplitude compared to the predetonation noise.
The detected signal is full-wave rectified and integrated by use of the INT/HOLD signal. The digital output from the integration stage is either converted to an analog signal, passed through an output buffer, or be read directly by the SPI.
This analog buffered output may be interfaced to an A/D converter and read by the microprocessor. The digital output may be directly interfaced to the microprocessor.
The data from the A/D enables the system to analyze the amount of retard timing for the next spark ignition timing cycle. With the microprocessor closed-loop system, advancing and retarding the spark timing optimizes the load/RPM conditions for a particular engine (data stored in RAM).
Key Features
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range - Device HBM Classification Level 3A
- Device CDM Classification Level C6
- Device Temperature Grade 1: –40°C to 125°C
- Dual-Channel Knock Sensor Interface
- Programmable Input Frequency Prescaler
(OSCIN) - Serial Interface With Microprocessor (SPI)
- Programmable Gain
- Programmable Band-Pass Filter Center Frequency
- External Clock Frequencies up to 24 MHz
- 4, 5, 6, 8, 10, 12, 16, 20, and 24 MHz
- Programmable Integrator Time Constants
- Operating Temperature Range –40°C to 125°C
Specifications
Category | Integrated Circuits (ICs)InterfaceSensor and Detector Interfaces | Series | Automotive, AEC-Q100 |
Programmable | Not Verified | Type | Sensor Interface |
Input Type | Serial | Output Type | Serial |
Current - Supply | 20 mA | Operating Temperature | -40°C ~ 125°C |
Mounting Type | Surface Mount | Base Product Number | TPIC8101 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
TPIC8101DWR Datasheet PDF
TPIC8101DWR PDF Preview
Availability: 6404 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $1.987 | $1.99 |
10+ | $1.721 | $17.21 |
30+ | $1.556 | $46.68 |
100+ | $1.297 | $129.70 |
500+ | $1.222 | $611.00 |
1000+ | $1.189 | $1,189.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TPIC8101DWR, guaranteed quotes back within 12hr.
Top Sellers
-
SN65HVD230DR
TI
1000+ $0.403
-
SN75176BP
TI
1000+ $0.309
-
PCF8574AN
TI
8-bit 2.5- to 5.5-V I2C/SMBus I/O expander with interrupt
-
MAX232N
Texas Instruments, Inc
2/2 Transceiver Full RS232 16-PDIP
-
TCA6424RGJR
Texas Instruments, Inc
24-bit translating 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
Item purchased 23/01/2020 and received 27/04/2020 (delay due to Chinese new year and Covid19, but it was shipped right after the new year holiday).Seller was quick to reply when I asked for more 30 days of buyer protection.Items packaged in bubble wrap envelope. No damage. As described. I don't know if they are original, but I measured around 680 uF (tipically, slightly higher) for all capacitors using a UT139C multimeter. ESR was not measured. Still haven't used them.