This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TPIC6B259DW +BOM

8-bit addressable latch with 150mA/ch

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

TPIC6B259DW
Datasheet:

TPIC6B259DW Datasheet (PDF)
Series:

TPIC
Logic Type:

D-Type, Addressable
Circuit:

8:8
Output Type:

DMOS
EDA/CAD Models:

Request Free CAD Models for TPIC6B259DW

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TPIC6B259DW General Description

This power logic 8-bit addressable latch controls open-drain DMOS-transistor outputs and is designed for general-purpose storage applications in digital systems. Specific uses include working registers, serial-holding registers, and decoders or demultiplexers. This is a multi-
functional device capable of storing single-line data in eight addressable latches and 3-to-8 decoder or demultiplexer with active-low DMOS outputs.

Four distinct modes of operation are selectable by controlling the clear (CLR\) and enable (G\) inputs as enumerated in the function table. In the addressable-latch mode, data at the data-in (D) terminal is written into the addressed latch. The addressed DMOS-transistor output inverts the data input with all unaddressed DMOS-transistor outputs remaining in their previous states. In the memory mode, all DMOS-transistor outputs remain in their previous states and are unaffected by the data or address inputs. To eliminate the possibility of entering erroneous data in the latch, enable G\ should be held high (inactive) while the address lines are changing. In the 3-to-8 decoding or demultiplexing mode, the addressed output is inverted with respect to the D input and all other

outputs are off. In the clear mode, all outputs are off and unaffected by the address and data inputs. When data is low for a given output, the DMOS-transistor output is off. When data is high, the DMOS-transistor output has sink-current capability.

Outputs are low-side, open-drain DMOS transistors with output ratings of 50 V and 150-mA continuous sink-current capability. Each output provides a 500-mA typical current limit at T_C = 25°C. The current limit decreases as the junction temperature increases for additional device protection.

The TPIC6B259 is characterized for operation over the operating case temperature range of -40°C to 125°C.

Key Features

Low r_DS(on).5 Typical
Avalanche Energy.30 mJ
Eight Power DMOS-Transistor Outputs of
150-mA Continuous Current
500-mA Typical Current-Limiting Capability
Output Clamp Voltage.50 V
Four Distinct Function Modes
Low Power Consumption

Specifications

Category	Integrated Circuits (ICs)LogicLatches	Series	TPIC
Logic Type	D-Type, Addressable	Circuit	8:8
Output Type	DMOS	Voltage - Supply	4.5V ~ 5.5V
Independent Circuits	1	Delay Time - Propagation	150ns
Current - Output High, Low	-	Operating Temperature	-40°C ~ 125°C
Mounting Type	Surface Mount	Base Product Number	TPIC6B259