Payment Method
TPA6130A2RTJR +BOM
Amplifier IC Headphones, 2-Channel (Stereo) Class AB 20-QFN (4x4)
QFN20-
Manufacturer:
-
Mfr.Part #:
TPA6130A2RTJR
-
Datasheet:
-
Series:
DirectPath™
-
Type:
Class AB
-
Output Type:
Headphones, 2-Channel (Stereo)
-
Max Output Power X Channels @ Load:
290mW x 1 @ 16Ohm; 138mW x 2 @ 16Ohm
-
EDA/CAD Models:
Availability: 4132 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TPA6130A2RTJR General Description
The TPA6130A2 is a stereo DirectPath™ headphone amplifier with I2C digital volume control. The TPA6130A2 has minimal quiescent current consumption, with a typical IDD of 4 mA, making it optimal for portable applications. The I2C control allows maximum flexibility with a 64 step audio taper volume control, channel independent enables and mutes, and the ability to configure the outputs into stereo, dual mono, or a single receiver speaker BTL amplifier that drives 300 mW of power into 16 Ω loads.
The TPA6130A2 is a high fidelity amplifier with an SNR of 98 dB. A PSRR greater than 100 dB enables direct-to-battery connections without compromising the listening experience. The output noise of 9 µVrms (typical A-weighted) provides a minimal noise background during periods of silence. Configurable differential inputs and high CMRR allow for maximum noise rejection in the noisy environment of a mobile device.
TPA6130A2 packaging includes a 2 by 2 mm chip-scale package, and a 4 by 4 mm QFN package.
Key Features
- DirectPath™ Ground-Referenced Outputs
- Eliminates Output DC Blocking Capacitors
- Reduces Board Area
- Reduces Component Height and Cost
- Full Bass Response Without Attenuation
- Power Supply Voltage Range: 2.5 V to 5.5 V
- 64 Step Audio Taper Volume Control
- High Power Supply Rejection Ratio
(>100 dB PSRR) - Differential Inputs for Maximum Noise Rejection
(68 dB CMRR) - High-Impedance Outputs When Disabled
- Advanced Pop and Click Suppression Circuitry
- Digital I2C Bus Control
- Per Channel Mute and Enable
- Software Shutdown
- Multi-Mode Support: Stereo HP, Dual Mono
HP, and Single-Channel BTL Operation - Amplifier Status
- Space Saving Packages
- 20 Pin, 4 mm × 4 mm QFN
- 16 ball, 2 mm × 2 mm DSBGA
- ESD Protection of 8 kV HBM and IEC Contact
Specifications
Category | Integrated Circuits (ICs)LinearAmplifiersAudio Amplifiers | Series | DirectPath™ |
Type | Class AB | Output Type | Headphones, 2-Channel (Stereo) |
Max Output Power x Channels @ Load | 290mW x 1 @ 16Ohm; 138mW x 2 @ 16Ohm | Voltage - Supply | 2.5V ~ 5.5V |
Features | Depop, Differential Inputs, I²C, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control | Mounting Type | Surface Mount |
Operating Temperature | -40°C ~ 85°C (TA) | Base Product Number | TPA6130 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 4,132
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TPA6130A2RTJR, guaranteed quotes back within 12hr.
Long went new end of the gap