This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TLV9004IRUCR +BOM

General Purpose Amplifier 4 Circuit Rail-to-Rail 14-QFN (2x2)

Manufacturer:

TEXAS INSTRUMENTS INC
Mfr.Part #:

TLV9004IRUCR
Datasheet:

TLV9004IRUCR Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
ECCN Code:

EAR99
EDA/CAD Models:

Request Free CAD Models for TLV9004IRUCR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TLV9004IRUCR General Description

The TLV900x family includes single (TLV9001), dual (TLV9002), and quad-channel (TLV9004) low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with rail-to-rail input and output swing capabilities. These op amps provide a cost-effective solution for space-constrained applications such as smoke detectors, wearable electronics, and small appliances where low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the TLV900x family is 500 pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the TLV600x devices.

The robust design of the TLV900x family simplifies circuit design. The op amps feature unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions.

The TLV900x devices include a shutdown mode (TLV9001S, TLV9002S, and TLV9004S) that allow the amplifiers to switch off into standby mode with typical current consumption less than 1 µA.

Micro-size packages, such as SOT-553 and WSON, are offered for all channel variants (single, dual, and quad), along with industry-standard packages such as SOIC, MSOP, SOT-23, and TSSOP packages.

Key Features

Scalable CMOS amplifier for low-cost applications
Rail-to-rail input and output
Low input offset voltage: ±0.4 mV
Unity-gain bandwidth: 1 MHz
Low broadband noise: 27 nV/√Hz
Low input bias current: 5 pA
Low quiescent current: 60 µA/Ch
Unity-gain stable
Internal RFI and EMI filter
Operational at supply voltages as low as 1.8 V
Easier to stabilize with higher capacitive load due to resistive open-loop output impedance
Extended temperature range: –40°C to 125°C

Specifications

Source Content uid	TLV9004IRUCR	Pbfree Code	Yes
Part Life Cycle Code	Active	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.33.00.01
Date Of Intro	2019-02-01	Amplifier Type	OPERATIONAL AMPLIFIER
Architecture	VOLTAGE-FEEDBACK	Common-mode Reject Ratio-Min	63 dB
Common-mode Reject Ratio-Nom	95 dB	Frequency Compensation	YES
Input Offset Voltage-Max	2000 µV	JESD-30 Code	S-PQCC-N14
JESD-609 Code	e4	Length	2 mm
Low-Bias	YES	Low-Offset	NO
Micropower	YES	Moisture Sensitivity Level	2
Number of Functions	4	Number of Terminals	14
Operating Temperature-Max	125 °C	Operating Temperature-Min	-40 °C
Packing Method	TR	Peak Reflow Temperature (Cel)	260
Power	NO	Programmable Power	NO
Seated Height-Max	0.4 mm	Slew Rate-Nom	2 V/us
Supply Current-Max	0.3 mA	Supply Voltage Limit-Max	6 V
Supply Voltage-Nom (Vsup)	5 V	Surface Mount	YES
Technology	CMOS	Temperature Grade	AUTOMOTIVE
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)	Terminal Form	NO LEAD
Terminal Pitch	0.4 mm	Terminal Position	QUAD
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED	Unity Gain BW-Nom	1000
Voltage Gain-Min	158489	Wideband	NO
Width	2 mm