This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TJA1145TKJ

IC TRANSCEIVER FULL 1/1 14HVSON

Manufacturer:

NXP
Mfr.Part #:

TJA1145TKJ
Datasheet:

TJA1145TKJ Datasheet (PDF)
Part Life Cycle Code:

Obsolete
Pin Count:

14
Reach Compliance Code:

compliant
Factory Lead Time:

52 Weeks
EDA/CAD Models:

Request Free CAD Models for TJA1145TKJ

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TJA1145TKJ General Description

CAN TRANSCEIVER, 1TX/RX, HVSON-14; IC Interface Type: CAN; No. of TX Buffers: 1; No. of RX Buffers: 1; Supply Voltage Min: 4.5V; Supply Voltage Max: 5.5V; Interface Case Style: HVSON; No. of Pins: 14Pins; Operating Temperature

Key Features

Fully compliant with the ISO 11898-2:2003, ISO 11898-5:2007 and ISO 11898-6:2013 standards
Timing guaranteed for data rates up to 2 Mbit/s
Autonomous bus biasing according to ISO 11898-6:2013
Optimized for in-vehicle high-speed CAN communication
No ‘false’ wake-ups due to CAN FD frame detection in TJA1145/FD variants
±8 kV ElectroStatic Discharge (ESD) protection, according to the Human Body Model (HBM) on the CAN bus pins
±6 kV ESD protection, according to IEC 61000-4-2 on pins BAT and WAKE and on the CAN bus pins
CAN bus pins short-circuit proof to ±58 V
Battery and CAN bus pins protected against transients according to ISO 7637-3, test pulses 1, 2a, 3a and 3b
Suitable for use in 12 V and 24 V systems
Available in SO14 and leadless HVSON14 package (3 mm x 4.5 mm) with improved Automated Optical Inspection (AOI) capability
AEC-Q100 qualified
Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)
Very low-current Standby and Sleep modes, with full wake-up capability
Entire node can be powered down via the inhibit output
Remote wake-up capability via standard CAN wake-up pattern or via ISO 11898-6:2013 and ISO 11898-2:2003 compliant selective wake-up frame detection
Local wake-up via the WAKE pin
Wake-up source recognition
Bit rates of 50 kbit/s, 100 kbit/s, 125 kbit/s, 250 kbit/s, 500 kbit/s and 1 Mbit/s supported during selective wake-up
Local and/or remote wake-up can be disabled to reduce current consumption
Transceiver disengages from the bus when the battery supply is removed
VIO input allows for direct interfacing with 3.3 V to 5 V microcontrollers
16-, 24- or 32-bit SPI for configuration, control and diagnosis
Transmit Data (TXD) dominant time-out function with diagnosis
Overtemperature warning and shut-down
Undervoltage detection and recovery on pins VCC, VIO and BAT
Cold start diagnosis (via bits PO and NMS)
Advanced system and transceiver interrupt handling

Application

Automotive Radar Systems
Driver Monitoring Systems (DMS) and Occupant Monitoring Systems

Specifications

Source Content uid	TJA1145TKJ	Part Life Cycle Code	Obsolete
Pin Count	14	Reach Compliance Code	compliant
Factory Lead Time	52 Weeks	Data Rate	1000 Mbps
JESD-30 Code	R-PDSO-N14	JESD-609 Code	e4
Moisture Sensitivity Level	1	Number of Terminals	14
Number of Transceivers	1	Peak Reflow Temperature (Cel)	260
Qualification Status	Not Qualified	Screening Level	AEC-Q100
Supply Current-Max	1.5 mA	Surface Mount	YES
Telecom IC Type	CAN TRANSCEIVER	Terminal Finish	NICKEL PALLADIUM GOLD SILVER
Terminal Form	NO LEAD	Terminal Pitch	0.635 mm
Terminal Position	DUAL	Time@Peak Reflow Temperature-Max (s)	30