Payment Method
THS4131CDR
Fully Differential Input/Output Low Noise Amplifier
-
Manufacturer:
-
Mfr.Part #:
THS4131CDR
-
Datasheet:
-
Number of channels:
1
-
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V):
4
-
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V):
33
-
BW at Acl (MHz):
150
-
EDA/CAD Models:
Availability: 5936 PCS
Please fill in the short form below and we will provide you the quotation immediately.
THS4131CDR General Description
The THS413x device is one in a family of fully-differential input/differential output devices fabricated using Texas Instruments state-of-the-art high voltage complementary bipolar process.
The THS413x is made of a true fully-differential signal path from input to output and high supply capability of up to ±15 V. This design leads to an excellent common-mode noise rejection performance (95 dB at 800 kHz) and total harmonic distortion (−102 dBc at 2 VPP, 250 kHz). The wide supply range allows high-voltage differential signal chains to benefit from its improved headroom and dynamic range without adding separate amplifiers for each polarity of the differential signal.
The THS413x is characterized for operation over the wide temperature range of –40°C to +85°C.
Key Features
- High performance
- Bandwidth: 170 MHz (VCC = ±15 V, G = 1 V/V)
- Slew rate: 51 V/µs
- Gain bandwidth product: 215 MHz
- Distortion: –102 dBc THD at 2 VPP, 250 kHz
- Voltage noise
- 1/f voltage noise corner: 350 Hz
- 1.25 nV/√Hz input-referred noise
- Single supply operating range: 5 V to 30 V
- Quiescent current (shutdown): 860 µA (THS4130)
Specifications
Number of channels | 1 | Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 4 |
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 33 | BW at Acl (MHz) | 150 |
Acl, min spec gain (V/V) | 1 | Slew rate (typ) (V/µs) | 52 |
Architecture | Bipolar, Fully Differential ADC Driver | Vn at flatband (typ) (nV√Hz) | 1.3 |
Iq per channel (typ) (mA) | 12.3 | Rail-to-rail | No |
Vos (offset voltage at 25°C) (max) (mV) | 2 | Operating temperature range (°C) | -40 to 85, 0 to 70 |
Iout (typ) (mA) | 85 | 2nd harmonic (dBc) | 88 |
3rd harmonic (dBc) | 84 | Frequency of harmonic distortion measurement (MHz) | 1 |
GBW (typ) (MHz) | 170 | Input bias current (max) (pA) | 6000000 |
CMRR (typ) (dB) | 95 | Rating | Catalog |
feature-type | Differential Amplifier | feature-number-of-elements-per-chip | 1 |
feature-number-of-channels-per-chip | 1 | feature-rail-to-rail | |
feature-typical-gain-bandwidth-product-mhz | 225 | feature-maximum-voltage-gain-db | 78(Typ) |
feature-minimum-cmrr-db | 80 | feature-minimum-psrr-db | 73 |
feature-output-type | Differential | feature-maximum-input-offset-voltage-mv | 2@±5V |
feature-maximum-input-bias-current-ua | 6@±5V@0C to 70C | feature-maximum-input-resistance-mohm | 34(Typ)@±5V |
feature-maximum-power-dissipation-mw | 1020 | feature-packaging | Tape and Reel |
feature-rad-hard | feature-pin-count | 8 | |
feature-cecc-qualified | No | feature-esd-protection | Yes |
feature-escc-qualified | feature-military | No | |
feature-aec-qualified | No | feature-aec-qualified-number | |
feature-eccn-code | EAR99 | feature-svhc | Yes |
feature-svhc-exceeds-threshold | No |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 5936 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $6.342 | $6.34 |
10+ | $5.508 | $55.08 |
30+ | $4.997 | $149.91 |
100+ | $4.571 | $457.10 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for THS4131CDR, guaranteed quotes back within 12hr.