Payment Method
SY100EP14UK4G
Clock Fanout Buffer (Distribution), Multiplexer IC 2:5 2 GHz 20-TSSOP (0.173", 4.40mm Width)
-
Manufacturer:
Microchip Technology
-
Mfr.Part #:
SY100EP14UK4G
-
Datasheet:
-
Series:
100EP, Precision Edge®, ECL Pro®
-
Type:
Fanout Buffer (Distribution), Multiplexer
-
Number of Circuits:
1
-
Ratio - InputOutput:
2:5
-
EDA/CAD Models:
Availability: 5477 PCS
Please fill in the short form below and we will provide you the quotation immediately.
SY100EP14UK4G General Description
The SY100EP14U is a high-speed, 2GHz differential PECL/ECL 1:5 fanout buffer optimized for ultra-low skew applications. Within device skew is guaranteed to be less than 25ps over temperature and supply voltage. The wide supply voltage operation allows this fanout buffer to operate in 2.5V, 3.3V, and 5V systems. A VBB reference is included for single-supply or AC-coupled PECL/ECL input applications, thus eliminating resistor networks. When interfacing to a single-ended or AC-coupled PECL/ECL input signal, connect the VBB pin to the unused /CLK pin, and bypass the pin to VCC through a 0.01µF capacitor.
The SY100EP14U features a 2:1 input MUX, making it an ideal solution for redundant clock switchover applications. If only one input pair is used, the other pair may be left floating. In addition, this device includes a synchronous enable pin that forces the outputs into a fixed logic state. Enable or disable state is initiated only after the outputs are in a LOW state, thus eliminating the possibility of a "runt" clock pulse.
The SY100EP14U I/O are fully differential and 100K ECL compatible. Differential 10K ECL logic can interface directly into the SY100EP14U inputs.The SY100EP14U is part of Micrel's high-speed clock synchronization family. For applications that require a different I/O combination, choose from a comprehensive product line of high-speed, low-skew fanout buffers, translators, and clock generators.
Key Features
- >2GHz fMAX
- <25ps within-device skew
- <275ps tr/tf time
- <525ps prop delay
- 2:1 Differential MUX input
- Flexible supply voltage: 2.5V/3.3V/5V
- Wide operating temperature range: -40°C to +85°C
- VBB reference for single-ended or AC-coupled PECL inputs
- 100K ECL compatible outputs
- Inputs accept PECL/LVPECL/ECL/HSTL logic
- 75k internal input pull-down resistors
- Available in a 20-Pin TSSOP package
Specifications
Series | 100EP, Precision Edge®, ECL Pro® | Type | Fanout Buffer (Distribution), Multiplexer |
Number of Circuits | 1 | Ratio - Input:Output | 2:5 |
Differential - Input:Output | Yes/Yes | Input | HSTL, LVECL, LVPECL |
Output | LVECL, LVPECL | Frequency - Max | 2 GHz |
Voltage - Supply | 2.37V ~ 5.5V | Operating Temperature | -40°C ~ 85°C |
Mounting Type | Surface Mount | Base Product Number | SY100 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 5477 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for SY100EP14UK4G, guaranteed quotes back within 12hr.
Top Sellers
-
HT1621B
Holtek Semicon
1000+ $0.324
-
MOC3021S
FAIRCHILD
5200+ $0.117
-
IR2113
Infineon
Driver 2-OUT High and Low Side 14-Pin PDIP Tube
-
SIM6822M
Allegro Microsystems
Module for Driving Three Half Bridges for Motors up to 300V in a 30-Pin DIP Package
-
IR2111S
Infineon Technologies
Half-Bridge Gate Driver IC Non-Inverting 8-SOIC