Payment Method
STM32F746VGT6
ARM® Cortex®-M7 STM32F7 Microcontroller IC 32-Bit Single-Core 216MHz 1MB (1M x 8) FLASH 100-LQFP (14x14)
-
Manufacturer:
-
Mfr.Part #:
STM32F746VGT6
-
Datasheet:
-
Series:
STM32
-
Core Processor:
ARM Cortex-M7
-
Core Size:
32-Bit
-
Speed:
216MHz
-
EDA/CAD Models:
Availability: 7613 PCS
Please fill in the short form below and we will provide you the quotation immediately.
STM32F746VGT6 General Description
The STM32F745xx and STM32F746xx devices are based on the high-performance ARM®Cortex®-M7 32-bit RISC core operating at up to 216 MHz frequency. The Cortex®-M7 core features a single floating point unit (SFPU) precision which supports all ARM®single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances the application security.The STM32F745xx and STM32F746xx devices incorporate high-speed embedded memories with a Flash memory up to 1 Mbyte, 320 Kbytes of SRAM (including 64 Kbytes of Data TCM RAM for critical real-time data), 16 Kbytes of instruction TCM RAM (for critical real-time routines), 4 Kbytes of backup SRAM available in the lowest power modes, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memories access.All the devices offer three 12-bit ADCs, two DACs, a low-power RTC, thirteen general-purpose 16-bit timers including two PWM timers for motor control and one low-power timer available in Stop mode, two general-purpose 32-bit timers, a true random number generator (RNG). They also feature standard and advanced communication interfaces.Evaluation board with STM32F769NI MCU.Discovery kit with STM32F746NG MCU.STM32 Nucleo-144 development board with STM32F74.ST-LINK/V2 in-circuit debugger/programmer for ST.
Key Features
- Core: ARM® 32-bit Cortex®-M7 CPU with FPU, adaptive real-time accelerator (ART Accelerator™) and L1-cache: 4KB data cache and 4KB instruction cache, allowing 0-wait state execution from embedded Flash memory and external memories, frequency up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions.
- Memories
- Up to 1MB of Flash memory
- 1024 bytes of OTP memory
- SRAM: 320KB (including 64KB of data TCM RAM for critical real-time data) + 16KB of instruction TCM RAM (for critical real-time routines) + 4KB of backup SRAM (available in the lowest power modes)
- Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories
- Dual mode Quad-SPI
- LCD parallel interface, 8080/6800 modes
- LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
- Clock, reset and supply management
- 1.7 V to 3.6 V application supply and I/Os
- POR, PDR, PVD and BOR
- Dedicated USB power
- 4-to-26 MHz crystal oscillator
- Internal 16 MHz factory-trimmed RC (1% accuracy)
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
- Low-power
- Sleep, Stop and Standby modes
- VBATsupply for RTC, 32×32 bit backup registers + 4KB backup SRAM
- 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
- 2×12-bit D/A converters
- Up to 18 timers: up to thirteen 16-bit (1x low- power 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 216 MHz. 2x watchdogs, SysTick timer
- General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
- Debug mode
- SWD & JTAG interfaces
Application
- The STM32F746VGT6 MCU can be used in a wide range of applications, including but not limited to:
- High-performance embedded systems
- Industrial control and automation
- Human-machine interface (HMI) devices
- Graphics-intensive applications
- Communication and networking equipment
- Audio and video processing systems
- Medical devices
- Consumer electronics
Specifications
Product Name | STM32F746VGT6 | Product Type | Microcontroller |
Series | STM32 | Core Processor | ARM Cortex-M7 |
Core Size | 32-Bit | Speed | 216MHz |
Connectivity | CAN, Ethernet, I²C, SPI, UART/USART, USB | Peripherals | DMA, FPU, I²S, PWM, QSPI, RTC, SDIO, TIM, UART, USB OTG HS, USB OTG FS, Watchdog, WDG |
Number of I/Os | 114 | Program Memory Size | 1MB (1M x 8) |
Data RAM Size | 320KB | Voltage - Supply | 2.4 V ~ 3.6 V |
Operating Temperature | -40°C ~ 85°C | Mounting Type | Surface Mount |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 7613 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $10.758 | $10.76 |
10+ | $10.441 | $104.41 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for STM32F746VGT6, guaranteed quotes back within 12hr.
Avaq deserves all the praise for their lightning-fast delivery and impeccable customer service. The STM32F746VGT6 components I ordered arrived in perfect condition, making Avaq my go-to distributor for electronic components.