This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

STA8089FGTR

Fully Integrated GPS/Galileo/Glonass/Beidou2/QZSS Receiver with embedded RF and in-package Flash

Manufacturer:

STMicroelectronics, Inc
Mfr.Part #:

STA8089FGTR
Datasheet:

STA8089FGTR Datasheet (PDF)
Frequency:

1.561GHz, 1.575GHz, 1.601GHz
Sensitivity:

-162dBm
Data Rate (Max):

12Mbps
Modulation or Protocol:

BeiDou, Galileo, GLONASS, GNSS, GPS

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

STA8089FGTR General Description

STA8089FG belongs to Teseo III family products. The device is a single die standalone positioning receiver IC working on multiple constellations (GPS/Galileo/GLONASS/BeiDou/QZSS).The device is backward compatible with STA8088FG, this enables fast customer application migration.The device is offered with a complete GNSS firmware which performs all GNSS operations including tracking, acquisition, navigation and data output with no need of external memories.STA8089FGBD can run also TESEO-DRAW the STMicroelectronics dead reckoning firmware.

Key Features

STMicroelectronics positioning receiver with 48 tracking channels and 2 fast acquisition channels supporting GPS, Galileo, GLONASS, BeiDou and QZSS systems
ST-DRAW (Dead Reckoning Automotive Way) supported (STA8089FGBD only)
Pin to pin compatible with STA8088FG
Single die standalone receiver embedding RF Front-End and low noise amplifier
-162 dBm indoor sensitivity (tracking mode)
Fast TTFF < 1 s in Hot start and 30 s in Cold Start
High performance ARM946 MCU (up to 196 MHz)
256 Kbyte embedded SRAM
In-package SQI Flash Memory (16 Mbits)
Real Time Clock (RTC) circuit
32-bit Watch-dog timer
3 UARTs
1 I²C master interface
1 Synchronous Serial Port (SSP, Motorola-SPI supported)
USB2.0 full speed (12 MHz) with integrated physical layer transceiver
2 Controller Area Network (CAN)
2 channels ADC (10 bits)
Operating condition:
- Main voltage regulator (V_INL): 1.8 V ± 5%
- Backup voltage (V_INB): 1.6 V to 4.3 V
- Digital voltage (V_DD): 1.0 V to 1.32 V
- RF core voltage (V_CC): 1.2 V ± 10%
- IO Ring Voltage (V_ddIO): 1.8 V ± 5% or 3.3 V ± 10%
Package:
- VFQFPN56 (7 x 7 x 1.0 mm) 0.4 mm pitch
Ambient temperature range: -40/+85°C

Specifications

Category	RF and WirelessRF Receivers	Series	-
Frequency	1.561GHz, 1.575GHz, 1.601GHz	Sensitivity	-162dBm
Data Rate (Max)	12Mbps	Modulation or Protocol	BeiDou, Galileo, GLONASS, GNSS, GPS
Applications	General Purpose	Current - Receiving	-
Data Interface	I²C, SPI, UART	Memory Size	256kB SRAM, 512kB ROM
Antenna Connector	PCB, Surface Mount	Features	-
Voltage - Supply	1.08V ~ 1.32V	Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Base Product Number	STA8089
feature-packaging	Tape and Reel	feature-pin-count	56
feature-cecc-qualified		feature-esd-protection
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	7A994
feature-svhc		feature-svhc-exceeds-threshold	No