This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SST89E516RD2-40-I-TQJE +BOM

8-bit Microcontrollers - MCU 64KB+8KB 40MHz

Manufacturer:

MICROCHIP TECHNOLOGY INC
Mfr.Part #:

SST89E516RD2-40-I-TQJE
Datasheet:

SST89E516RD2-40-I-TQJE Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Obsolete
Pin Count:

44
Reach Compliance Code:

compliant
EDA/CAD Models:

Request Free CAD Models for SST89E516RD2-40-I-TQJE

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SST89E516RD2-40-I-TQJE General Description

8051 FlashFlex® Microcontroller IC 8-Bit 40MHz 72KB (72K x 8) FLASH 44-TQFP (10x10)

Key Features

8-bit 8051-Compatible Microcontroller (MCU) with Embedded SuperFlash Memory
– Fully Software Compatible
– Development Toolset Compatible
– Pin-For-Pin Package Compatible
SST89E516RD2 Operation
– 0 to 40 MHz at 5V
SST89V516RD2 Operation
– 0 to 33 MHz at 3V
1 KByte Internal RAM
Dual Block SuperFlash EEPROM
– 64 KByte primary block + 8 KByte secondary block (128-Byte sector size for both blocks)
– Individual Block Security Lock with SoftLock
– Concurrent Operation during
In-Application Programming (IAP)
– Memory Overlay for Interrupt Support during IAP
Support External Address Range up to 64 KByte of Program and Data Memory
Three High-Current Drive Ports (16 mA each)
Three 16-bit Timers/Counters
Full-Duplex, Enhanced UART
– Framing Error Detection
– Automatic Address Recognition
Ten Interrupt Sources at 4 Priority Levels
– Four External Interrupt Inputs
Programmable Watchdog Timer (WDT)
Programmable Counter Array (PCA)
Four 8-bit I/O Ports (32 I/O Pins) and One 4-bit Port
Second DPTR register
Low EMI Mode (Inhibit ALE)
SPI Serial Interface
Standard 12 Clocks per cycle, the device has an option to double the speed to 6 clocks per cycle.
TTL- and CMOS-Compatible Logic Levels
Brown-out Detection
Low Power Modes
– Power-down Mode with External Interrupt Wake-up
– Idle Mode
Temperature Ranges:
– Commercial (0°C to +70°C)
– Industrial (-40°C to +85°C)
Packages Available
– 40-contact WQFN (Port 4 feature not available)
– 44-lead PLCC
– 40-pin PDIP (Port 4 feature not available)
– 44-lead TQFP
All non-Pb (lead-free) devices are RoHS compliant

Specifications

Source Content uid	SST89E516RD2-40-I-TQJE	Pbfree Code	Yes
Part Life Cycle Code	Obsolete	Pin Count	44
Reach Compliance Code	compliant	ECCN Code	3A991.A.2
HTS Code	8542.31.00.01	Has ADC	NO
Address Bus Width	16	Bit Size	8
CPU Family	8051	Clock Frequency-Max	40 MHz
DAC Channels	NO	DMA Channels	NO
External Data Bus Width	8	JESD-30 Code	S-PQFP-G44
JESD-609 Code	e3	Length	10 mm
Moisture Sensitivity Level	3	Number of I/O Lines	36
Number of Terminals	44	On Chip Program ROM Width	8
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
PWM Channels	YES	Power Supplies	5 V
Qualification Status	Not Qualified	RAM (bytes)	1024
ROM (words)	67584	ROM Programmability	FLASH
Seated Height-Max	1.2 mm	Speed	40 MHz
Supply Current-Max	88 mA	Supply Voltage-Max	5.5 V
Supply Voltage-Min	4.5 V	Supply Voltage-Nom	5 V
Surface Mount	YES	Technology	CMOS
Temperature Grade	INDUSTRIAL	Terminal Finish	MATTE TIN
Terminal Form	GULL WING	Terminal Pitch	0.8 mm
Terminal Position	QUAD	Width	10 mm
uPs/uCs/Peripheral ICs Type	MICROCONTROLLER