This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

SST39VF040-70-4I-NHE

FLASH Memory IC 4Mbit Parallel 70 ns 32-PLCC (11.43x13.97)

SST39VF040-70-4I-NHE General Description

The SST39VF040 is a 5124K x8CMOS Multi-Purpose Flash (MPF) manufactured with SST proprietary, high performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. The SST39VF040 device writes (Program or Erase) with a 2.7-3.6V power supply. The device conforms to JEDEC standard pinouts for x8 memories.

Key Features

    • Organized as 64K x8 / 128K x8 / 256K x8 / 512K x8
    • Single Voltage Read and Write Operations– 3.0-3.6V for SST39LF512/010/020/040– 2.7-3.6V for SST39VF512/010/020/040
    • Superior Reliability– Endurance: 100,000 Cycles (typical)– Greater than 100 years Data Retention
    • Low Power Consumption(typical values at 14 MHz)– Active Current: 5 mA (typical)– Standby Current: 1 µA (typical)
    • Sector-Erase Capability– Uniform 4 KByte sectors
    • Fast Read Access Time:– 45 ns for SST39LF512/010/020/040– 55 ns for SST39LF020/040– 70 ns for SST39VF512/010/020/040
    • Latched Address and Data
    • Fast Erase and Byte-Program:– Sector-Erase Time: 18 ms (typical)– Chip-Erase Time: 70 ms (typical)– Byte-Program Time: 14 µs (typical)– Chip Rewrite Time:1 second (typical) for SST39LF/VF5122 seconds (typical) for SST39LF/VF0104 seconds (typical) for SST39LF/VF0208 seconds (typical) for SST39LF/VF040
    • Automatic Write Timing– Internal VPP Generation
    • End-of-Write Detection– Toggle Bit– Data# Polling
    • CMOS I/O Compatibility
    • JEDEC Standard– Flash EEPROM Pinouts and command sets
    • Packages Available– 32-lead PLCC– 32-lead TSOP (8mm x 14mm)– 48-ball TFBGA (6mm x 8mm)– 34-ball WFBGA (4mm x 6mm) for 1M and 2M
    • All devices are RoHS compliant

Specifications

Product Category: NOR Flash Mounting Style: SMD/SMT
Series: SST39VF Memory Size: 4 Mbit
Supply Voltage - Min: 2.7 V Supply Voltage - Max: 3.6 V
Active Read Current - Max: 20 mA Interface Type: Parallel
Organization: 512 k x 8 Data Bus Width: 8 bit
Timing Type: Asynchronous Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 85 C Packaging: Tube
Architecture: Sectored Height: 2.84 (Max) mm
Length: 14.05 (Max) mm Memory Type: NOR
Moisture Sensitive: Yes Product Type: NOR Flash
Programming Voltage: 2.7 V to 3.6 V Speed: 70 ns
Standard: Not Supported Factory Pack Quantity: 30
Subcategory: Memory & Data Storage Type: No Boot Block
Width: 11.51 (Max) mm Unit Weight: 0.007055 oz
Pin Count 32 Released Date May 24, 2015
Last Modified Date Mar 7, 2023 4:10 PM UTC

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method

hsbc
TT/Wire Transfer
paypal
Paypal
wu
Western Union
mg
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty Warranty

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

More
B
B**s 09/17/2022

The package was on the way for 50 days. Resistance correspond to the description.I'm happy. Thanks!

14
L
L**n 03/09/2022

The description corresponds. Installation neat, works like a clock. I recommend.

3
v
v**n 02/20/2022

The product corresponds to the description. Everybody's working. Good seller.

11
J
J**a 03/03/2021

Got for eight days, well, it's because the goods are cheap. I can not check yet, but there are a lot of plans for the chip. As i will do anything, i will write a review. In the near future i will take care.

18

Reviews

You need to log in to reply. Sign In | Sign Up