This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SST26WF064C-104I/SM

64Mb 1.65-1.95V Serial Quad I/O (SQI) Flash.

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

SST26WF064C-104I/SM
Datasheet:

SST26WF064C-104I/SM Datasheet (PDF)
Mounting Style:

SMD/SMT
Series:

SST26WF064C
Memory Size:

64 Mbit
Maximum Clock Frequency:

104 MHz

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SST26WF064C-104I/SM General Description

The SST26WF064C Serial Quad I/O (SQI) flash device utilizes a 4-bit multiplexed I/O serial interface to boost performance while maintaining the compact form factor of standard serial flash devices. SST26WF064C also supports full command-set compatibility to traditional Serial Peripheral Interface (SPI) protocol. Operating at frequencies reaching 104 MHz, the SST26WF064C enables minimum latency execute-in-place (XIP) capability without the need for code shadowing on an SRAM. The SST26WF064C writes (Program or Erase) with a single power supply of 1.65-1.95V and significantly lower power consumption. The device’s low power consumption makes it the ideal choice for wireless and any battery powered devices. Further benefits are achieved with SST’s proprietary, high-performance CMOS SuperFlash® technology, which significantly improves performance and reliability.

Key Features

Single Voltage Read and Write Operations - 1.65 V - 1.95V
x1/x2/x4 Serial Peripheral Interface (SPI) Protocol
Nibble-wide multiplexed I/O’s with SPI-like serial command structure
Dual-Transfer Rate (DTR) Operation
104 MHz max
54 MHz max (DTR)
Continuous linear burst
8/16/32/64 Byte linear burst with wrap-around
Endurance: 100,000 Cycles (min)
Greater than 100 years Data Retention
Active Read current: 15mA (typical@104MHz)
Standby current: 10µA(typical)
Deep Power-Down current: 2.5µA(typical)
Sector/Block Erase: 18 ms (typ), 25 ms (max)
Chip Erase: 35 ms (typ), 50 ms (max)
256 Bytes per page in x1or x4mode
Uniform 4Kbyte sectors
Four 8Kbyte top and bottom parameter overlay blocks
One 32Kbyte top and bottom overlay block
Uniform 64Kbyte overlay blocks
Suspend Program or Erase operation to access another block/sector
Software and Hardware Reset mode
Supports JEDEC-compliant Serial Flash Discoverable Parameter (SFDP) table
Individual-Block Write Protection with permanent lock-down capability
Read Protection on top and bottom 8Kbyte parameter blocks
One-Time Programmable (OTP) 2KByte, Secure ID
64 bit unique, factory pre-programmed identifier
User-programmable area
Industrial: -40°C to +85°C
8-contact WDFN (6mm x 5mm)
8-lead SOIJ (5.28 mm)
16-lead SOIC( 7.50mm)
24-ball TBGA (8mmx6mm)
All devices are RoHS compliant

Microchip Technology, Inc Original Stock

Specifications

Product Category:	NOR Flash	Mounting Style:	SMD/SMT
Series:	SST26WF064C	Memory Size:	64 Mbit
Maximum Clock Frequency:	104 MHz	Interface Type:	SPI
Organization:	8 M x 8	Data Bus Width:	8 bit
Supply Voltage - Min:	1.65 V	Supply Voltage - Max:	1.95 V
Supply Current - Max:	25 mA	Minimum Operating Temperature:	- 40 C
Maximum Operating Temperature:	+ 85 C	Packaging:	Tube
Memory Type:	NOR	Speed:	104 MHz
Product Type:	NOR Flash	Factory Pack Quantity:	90
Subcategory:	Memory & Data Storage	Tags	SST26WF064C-1, SST26WF06, SST26W, SST26, SST2, SST