This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SST25VF016B-50-4I-S2AF +BOM

16Mb 2.7-3.6V SPI Serial Flash.

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

SST25VF016B-50-4I-S2AF
Datasheet:

SST25VF016B-50-4I-S2AF Datasheet (PDF)
Series:

SST25
Memory Type:

Non-Volatile
Memory Format:

FLASH
Technology:

FLASH
EDA/CAD Models:

Request Free CAD Models for SST25VF016B-50-4I-S2AF

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SST25VF016B-50-4I-S2AF General Description

16M FLASH MEMORY, SPI, SOIC8; Flash Memory Type: Serial NOR; Memory Size: 16Mbit; Flash Memory Configuration: 2M x 8bit; IC Interface Type: Serial, SPI; Memory Case Style: SOIC; No. of Pins: 8Pins; Clock Frequency: 50MHz; Access Time: -; Supply Voltage Min: 2.7V; Supply Voltage Max: 3.6V; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Product Range: 3V Serial NOR Flash Memories; RoHS Phthalates Compliant: Yes; MSL: MSL 1 - Unlimited; SVHC: No SVHC (15-Jan-2018); Device Marking: SST25VF016B-50-4I-S2AF; Memory Type: Flash; Operating Temperature Range: -40°C to +85°C; Supply Voltage Range: 2.7V to 3.6V; Termination Type: Surface Mount Device

Key Features

Serial Interface Architecture– SPI Compatible: Mode 0 and Mode 3
Up to 50 MHz Clock Frequency
Superior Reliability– Endurance: 100,000 Cycles (typical)– Greater than 100 years Data Retention
Low Power Consumption:– Active Read Current: 10 mA (typical)– Standby Current: 5 µA (typical)
Flexible Erase Capability– Uniform 4 KByte sectors– Uniform 32 KByte overlay blocks– Uniform 64 KByte overlay blocks
Fast Erase and Byte-Program:– Chip-Erase Time: 35 ms (typical)– Sector-/Block-Erase Time: 18 ms (typical)– Byte-Program Time: 7 µs (typical)
Auto Address Increment (AAI) Programming– Decrease total chip programming time overByte-Program operations
End-of-Write Detection– Software polling the BUSY bit in Status Register– Busy Status readout on SO pin in AAI Mode
Hold Pin (HOLD#)– Suspends a serial sequence to the memorywithout deselecting the device
Write Protection (WP#)– Enables/Disables the Lock-Down function of thestatus register
Software Write Protection– Write protection through Block-Protection bits instatus register
Temperature Range– Commercial: 0°C to +70°C– Industrial: -40°C to +85°C
Packages Available– 8-lead SOIC (200 mils)– 8-contact WSON (6mm x 5mm)
All non-Pb (lead-free) devices are RoHS compliant

Specifications

Category	Integrated Circuits (ICs)MemoryMemory	Series	SST25
Memory Type	Non-Volatile	Memory Format	FLASH
Technology	FLASH	Memory Size	16Mbit
Memory Organization	2M x 8	Memory Interface	SPI
Clock Frequency	50 MHz	Write Cycle Time - Word, Page	10µs
Voltage - Supply	2.7V ~ 3.6V	Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Base Product Number	SST25VF016