Payment Method
SSCSNBN001NDAA5
Pressure Sensor -1inH2O to 1inH2O Differential 4-Pin SIP Module
-
Manufacturer:
Honeywell Sensing and Productivity Solutions
-
Mfr.Part #:
SSCSNBN001NDAA5
-
Datasheet:
-
Part Life Cycle Code:
Active
-
Reach Compliance Code:
compliant
-
Accuracy-Max (%):
0.25%
-
Additional Feature:
Port Diameter = 4.8 MM
-
EDA/CAD Models:
Availability: 4289 PCS
Please fill in the short form below and we will provide you the quotation immediately.
SSCSNBN001NDAA5 General Description
TruStability™ SSC Series-Standard Accuracy, analog, SIP NB: fastener mount, dual axial ports, same side, differential, ±1 inH2O, 5.0 Vdc The TruStability™ Standard Accuracy Silicon Ceramic (SSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The SSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. The SSC Series is calibrated over the temperature range of -20 °C to 85 °C [-4 °F to 185 °F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc. These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between two pressure ports. The TruStability™ pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O. All products are designed and manufactured according to ISO 9001 standards.
Specifications
Source Content uid | SSCSNBN001NDAA5 | Part Life Cycle Code | Active |
Reach Compliance Code | compliant | Accuracy-Max (%) | 0.25% |
Additional Feature | Port Diameter = 4.8 MM | Housing | CERAMIC |
Mounting Feature | THROUGH HOLE MOUNT | Number of Bits | 14 |
Operating Current-Max | 3 mA | Operating Temperature-Max | 85 °C |
Operating Temperature-Min | -40 °C | Output Type | ANALOG VOLTAGE |
Port Type | BARBED | Pressure Range-Max | 0.0361 Psi |
Pressure Range-Min | -0.0361 Psi | Pressure Sensing Mode | DIFFERENTIAL |
Response Time | 1000 µs | Sensors/Transducers Type | PRESSURE SENSOR,PIEZORESISTIVE |
Supply Voltage-Max | 5.05 V | Supply Voltage-Min | 4.95 V |
Surface Mount | NO | Termination Type | SOLDER |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 4289 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $84.582 | $84.58 |
200+ | $32.732 | $6,546.40 |
500+ | $31.583 | $15,791.50 |
1000+ | $31.014 | $31,014.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for SSCSNBN001NDAA5, guaranteed quotes back within 12hr.
Top Sellers
-
BMP388
Bosch
1000+ $1.341
-
BMP280
Bosch
1000+ $1.287
-
TP4056
Yongyutai
8000+ $0.025
-
BMP180
Bosch Sensortec
Pressure Sensor 4.35PSI ~ 15.95PSI (30kPa ~ 110kPa) Absolute 16 ~ 19 b 7-VLGA
-
PE-22
Panasonic Industrial Automation Sales
Pressure Sensor 145.04PSI (1000kPa) Vented Gauge Female - M5, Male - 1/4" (6.35mm) BSPT Module Box with Display