This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SN75LVPE4410RNQT

4-channel 16-Gbps linear redriver

Manufacturer:

Texas Instruments
Mfr.Part #:

SN75LVPE4410RNQT
Datasheet:

SN75LVPE4410RNQT Datasheet (PDF)
Mounting Style:

SMD/SMT
Product:

Equalizers
Data Rate:

16 Gb/s
Operating Supply Voltage:

3.3 V

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SN75LVPE4410RNQT General Description

The SN75LVPE4410 is a four channel low-power high-performance linear repeater/redriver designed to support PCI Express (PCIe) Generation 1.0, 2.0, 3.0 and 4.0.

The SN75LVPE4410 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear datapaths of SN75LVPE4410 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol result in best electrical link and lowest possible latency. The programmable equalization of the device along with its linear datapaths maximizes the flexibility of physical placement within the interconnect channel and improves overall channel performance.

The programmable settings can be applied easily through software (SMBus or I²C) or by using pin control.

Key Features

Quad-channel linear equalizer supporting PCIe 1.0/2.0/3.0/4.0 up to 16 Gbps interfaces
CTLE boosts up to 18 dB at 8 GHz helps to extend channel reach
Automatic receiver detection for PCIe use cases
Protocol agnostic linear redriver allows seamless support for PCIe link training
Ultra-low latency of 70 ps (typical)
Low additive random jitter of 60 fs (typical) with PRBS data
Single 3.3-V supply
Low active power of 124 mW/channel (typical) - no heat sink required
Pin-strap or SMBus programming
Support for x2, x4, x8, x16 PCIe bus width with one or multiple SN75LVPE4410
Commercial temperature range of 0ºC to 70ºC
4.0 mm × 6.0 mm, 40 pin WQFN package

Specifications

Product Category	Equalizers	Mounting Style	SMD/SMT
Product	Equalizers	Data Rate	16 Gb/s
Operating Supply Voltage	3.3 V	Operating Supply Current	150 mA
Minimum Operating Temperature	0 C	Maximum Operating Temperature	+ 70 C
Series	SN75LVPE4410	Input Voltage	3.3 V
Interface Type	PCIe	Moisture Sensitive	Yes
Number of Drivers	4 Driver	Number of Receivers	4 Receiver
Output Voltage	2.5 V	Product Type	Equalizers
Factory Pack Quantity	250	Subcategory	Equalizers
Supply Voltage - Max	3.6 V	Supply Voltage - Min	3 V
Type	Linear Redriver	Unit Weight	0.002607 oz