This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SMBJ250CA

405V Clamp 1.5A Ipp Tvs Diode Surface Mount SMB (DO-214AA)

Manufacturer:

SMC Diode Solutions
Mfr.Part #:

SMBJ250CA
Datasheet:

SMBJ250CA Datasheet (PDF)
Pbfree Code:

No
Part Life Cycle Code:

Active
Pin Count:

2
Reach Compliance Code:

not_compliant
EDA/CAD Models:

Request Free CAD Models for SMBJ250CA

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SMBJ250CA General Description

The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Key Features

Excellent clamping capability
Low incremental surge resistance
Typical I
R
less than 1µA above 12V
For surface mounted applications to optimize board space
Low profile package
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
Built-in strain relief
Fast response time: typically less than 1.0ps from 0V to BV min
600W peak pulse power capability at 10×1000μs waveform, repetition rate (duty cycles):0.01%
Typical maximum temperature coefficient ΔV
BR
= 0.1% × V
BR
@25°C × ΔT
Glass passivated chip junction
High temperature soldering guaranteed: 260°C/40 seconds at terminals
Plastic package has underwriters laboratory flammability 94V-O
Matte tin lead–free plated
Halogen free and RoHS compliant

Application

TVS devices are ideal for the protection of I/O Interfaces, V
CC
bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.

Specifications

Pbfree Code	No	Part Life Cycle Code	Active
Pin Count	2	Reach Compliance Code	not_compliant
ECCN Code	EAR99	HTS Code	8541.10.00.50
Additional Feature	EXCELLENT CLAMPING CAPABILITY	Breakdown Voltage-Max	309 V
Breakdown Voltage-Min	279 V	Breakdown Voltage-Nom	294 V
Clamping Voltage-Max	405 V	Configuration	SINGLE
Diode Element Material	SILICON	Diode Type	TRANS VOLTAGE SUPPRESSOR DIODE
JEDEC-95 Code	DO-214AA	JESD-30 Code	R-PDSO-C2
JESD-609 Code	e3	Moisture Sensitivity Level	1
Non-rep Peak Rev Power Dis-Max	600 W	Number of Elements	1
Number of Terminals	2	Operating Temperature-Max	150 °C
Operating Temperature-Min	-65 °C	Peak Reflow Temperature (Cel)	260
Polarity	BIDIRECTIONAL	Power Dissipation-Max	5 W
Qualification Status	Not Qualified	Reference Standard	IEC-61000-4-2, 4-4; UL RECOGNIZED
Rep Pk Reverse Voltage-Max	250 V	Reverse Current-Max	1 µA
Reverse Test Voltage	250 V	Surface Mount	YES
Technology	AVALANCHE	Terminal Finish	MATTE TIN
Terminal Form	C BEND	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	40	Series	SMBJ
Type	Zener	Bidirectional Channels	1
Voltage - Reverse Standoff (Typ)	250V	Voltage - Breakdown (Min)	279V
Voltage - Clamping (Max) @ Ipp	405V	Current - Peak Pulse (10/1000µs)	1.5A
Power - Peak Pulse	600W	Power Line Protection	No
Applications	General Purpose	Operating Temperature	-55°C ~ 150°C (TJ)
Mounting Type	Surface Mount	Base Product Number	SMBJ25