This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

PTN5150AHXMP

3.3V/5V T/R 12-Pin X2QFN USB Type-C Controller

Manufacturer:

Nxp
Mfr.Part #:

PTN5150AHXMP
Datasheet:

PTN5150AHXMP Datasheet (PDF)
Ambient Operating Temperature (Min to Max) (℃):

-40 to 85
Description:

USB Type-C Rev 1.1 CC-Logic, Pin to control NXP redriver
Number of pins:

12
Operating Temperature (Min-Max) (℃):

-40 to 85
EDA/CAD Models:

Request Free CAD Models for PTN5150AHXMP

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

PTN5150AHXMP General Description

PTN5150 is a small thin low power CC Logic chip supporting the USB Type-C connector application with Configuration Channel (CC) control logic detection and indication functions. The features of PTN5150 enable USB Type-C connector to be used in both host and device ends of the Type-C cable. It can support Type-C to USB legacy cables and adapters defined in USB Type-C Spec. PTN5150 can work autonomously, or can connect to a controller through I²C-bus interface.

PTN5150 can be configured to dual role, host, or device mode through external configuration pin or through I²C interface. The CC control logic detection and indication block supports 3 current modes (default current 500 mA/900 mA, medium current 1.5 A and high current 3.0 A) in DFP advertisement's perspective. When in UFP advertisement's perspective, the control logic will detect if a DFP with different pull-up Rp current source is connected. In addition, it will detect if Ra is present on CC1/CC2 pins. Upon detection of plug orientation, pin ID will indicate if PTN5150 is working under either host role or device role, and other status will also be reflected in I²C registers.

Key Features

Support type C connector with existing chipsets
USB Type-C Rev 1.1 compliance
Compatible with legacy OTG hardware and software
Support plug, orientation, role and charging current detection
USB-ID pin for OTG application
I²C-bus interface support for fast mode

Application

Charging docks for mobile devices and laptops
Power banks and portable chargers
Docking stations for USB Type-C devices
USB PD adapters and hubs

Specifications

Ambient Operating Temperature (Min to Max) (℃)	-40 to 85	Security Status	COMPANY PUBLIC
Description	USB Type-C Rev 1.1 CC-Logic, Pin to control NXP redriver	Number of pins	12
Operating Temperature (Min-Max) (℃)	-40 to 85