This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

PCI9030-AA60BI F

PCI Interface IC 32-bit 33MHz PCI v.2.2-compliant

Manufacturer:

PLX
Mfr.Part #:

PCI9030-AA60BI F
Datasheet:

PCI9030-AA60BI F Datasheet (PDF)
Type:

I/O Accelerator - PCI
Maximum Clock Frequency:

33 MHz
Supply Voltage - Max:

3.3 V
Supply Voltage - Min:

3.3 V
EDA/CAD Models:

Request Free CAD Models for PCI9030-AA60BI F

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

PCI9030-AA60BI F General Description

I/O ACCELERATOR, PCI 2.2, -40 TO 85DEG C; PCI Bus Type: I/O Accelerator; PCI Express Base Spec: PCI 2.2; Digital IC Case: µBGA; No. of Pins: 180Pins; Supply Voltage Min: -; Supply Voltage Max: 3.3V; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Product Range: -; MSL: MSL 3 - 168 hours; SVHC: No SVHC (27-Jun-2018)

Key Features

Two 16C950 High performance UART channels
IEEE1284 Compliant SPP/EPP/ECP parallel port
Multi-function target PCI controller. Fully compliant to PCI bus specification 2.2 and PCI Power Management 1.0.
Function access to pre-configure each UART and the parallel port, prior to handover to generic device drivers.
UARTs fully software compatible with 16C550-type devices.
Baud rates up to 15Mbps in asynchronous mode and 60Mbps in external 1x clock mode
128-byte deep FIFO per transmitter and receiver
Flexible clock prescaler from 1 to 31.875
Automated in-band flow control using programmable Xon/Xoff in both directions
Automated out-of-band flow control using CTS#/RTS# and/or DSR#/DTR#
Arbitrary trigger levels for receiver and transmitter FIFO interrupts and automatic in-band and out-ofband flow control
Infra-red (IrDA) receiver and transmitter operation
5, 6, 7, 8 and 9-bits data framing
Global Interrupt Status and readable FIFO levels to facilitate implementation of efficient device drivers
Detection of bad data in the receiver FIFO
2 multi-purpose IO pins which can be configured as interrupt inputs or ‘wake-up’ pins (via local registers).
Auto-detection of a range of optional MicrowireTM compatible EEPROMs, to reconfigure device.
Operation via IO or memory mapping.
5.0V operation
128 pin TQFP package

Specifications

Product Category	PCI Interface IC	Type	I/O Accelerator - PCI
Maximum Clock Frequency	33 MHz	Supply Voltage - Max	3.3 V
Supply Voltage - Min	3.3 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Mounting Style	SMD/SMT
Data Bus Width	32 bit	Data Rate	1056 Mb/s
Moisture Sensitive	Yes	Operating Supply Voltage	3.3 V
Product Type	PCI Interface IC	Factory Pack Quantity	1680
Subcategory	Interface ICs	Unit Weight	0.423288 oz