This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

P6SMB550CA

760V Clamp 800mA Ipp Tvs Diode Surface Mount DO-214AA (SMBJ)

Manufacturer:

Diotec Semiconductor
Mfr.Part #:

P6SMB550CA
Datasheet:

P6SMB550CA Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Pin Count:

2
Reach Compliance Code:

not_compliant
EDA/CAD Models:

Request Free CAD Models for P6SMB550CA

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

P6SMB550CA General Description

Direction Type = Bi-Directional / Reverse Stand-off Voltage Max. V = 468 / Clamping Voltage V = 760 / Peak Pulse Power Dissipation W = 600 / Peak Pulse Current A = 1.1 / Breakdown Voltage Min. V = 522.5 / Breakdown Voltage Max. V = 577.5 / Operating Temperature Max. °C = 150 / Operating Temperature Min. °C = -65 / Reverse Leakage Current Max. uA = 1 / Voltage ESD Air Gap Max. kV = 30 / Voltage ESD Contact Max. kV = 30 / Pins = 2 / Package Type = DO-214AA / Mounting Type = SMD / MSL = Level-1 / Packaging = Tape & Reel / Reflow Temperature Max. °C = 260

Key Features

600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
Excellent clamping capability
Low incremental surge resistance
Typical I
R
less than 1μA when V
BR
min>12V
Optimized surface mount footprint for minimal PCB space impact
Low profile package
Typical failure mode due to exceeding maximum ratings is a short circuit condition
Whisker test conducted based on Table 4a and 4c of JEDEC JESD201A
IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact)
EFT protection of data lines in accordance with IEC 61000-4-4
Built-in strain relief
Fast response time: typically less than 1.0ps from 0V to V
BR
min
High temperature to reflow soldering guaranteed: 260°C/40sec
V
BR
@ T
J
= V
BR
@25°C x (1+αT x (T
J
- 25)) (αT:Temperature Coefficient, typical value is 0.1%)
UL Recognized compound meeting flammability classification V-0
Meet MSL level1, per J-STD-020, LF maximun peak of 260°C
Matte tin lead–free plated
Halogen free and RoHS compliant
Pb-free E3 means 2
ND
level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01)

Application

TVS devices are ideal for the protection of I/O Interfaces, V
CC
bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.

Specifications

Pbfree Code	Yes	Part Life Cycle Code	Active
Pin Count	2	Reach Compliance Code	not_compliant
ECCN Code	EAR99	HTS Code	8541.10.00.50
Additional Feature	EXCELLENT CLAMPING CAPABILITY	Breakdown Voltage-Max	577.5 V
Breakdown Voltage-Min	522.5 V	Breakdown Voltage-Nom	550 V
Clamping Voltage-Max	760 V	Configuration	SINGLE
Diode Element Material	SILICON	Diode Type	TRANS VOLTAGE SUPPRESSOR DIODE
JEDEC-95 Code	DO-214AA	JESD-30 Code	R-PDSO-J2
JESD-609 Code	e3	Moisture Sensitivity Level	1
Non-rep Peak Rev Power Dis-Max	600 W	Number of Elements	1
Number of Terminals	2	Operating Temperature-Max	150 °C
Operating Temperature-Min	-55 °C	Peak Reflow Temperature (Cel)	260
Polarity	BIDIRECTIONAL	Power Dissipation-Max	5 W
Qualification Status	Not Qualified	Rep Pk Reverse Voltage-Max	495 V
Surface Mount	YES	Technology	AVALANCHE
Terminal Finish	Matte Tin (Sn)	Terminal Form	J BEND
Terminal Position	DUAL	Time@Peak Reflow Temperature-Max (s)	40
Series	P6SMB	Type	Zener
Bidirectional Channels	1	Voltage - Reverse Standoff (Typ)	468V
Voltage - Breakdown (Min)	522.5V	Voltage - Clamping (Max) @ Ipp	760V
Current - Peak Pulse (10/1000µs)	800mA	Power - Peak Pulse	600W
Power Line Protection	No	Applications	General Purpose
Operating Temperature	-55°C ~ 150°C (TJ)	Mounting Type	Surface Mount