This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

NCV7381CDP0R2G

1/1 Transceiver Half FlexRay 16-SSOP

Manufacturer: ON Semiconductor, LLC
Mfr.Part #: NCV7381CDP0R2G
Datasheet: NCV7381CDP0R2G Datasheet (PDF)
Case Outline: 565AE
MSL Temp (°C): 260
Container Type: REEL
EDA/CAD Models: Request Free CAD Models for NCV7381CDP0R2G

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

NCV7381CDP0R2G General Description

NCV7381C is a high−temperature single-channel FlexRay transceiver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10 Mbit/s. It provides differential transmit and receive capability between a wired FlexRay communication medium on one side and a protocol controller and a host on the other side.
NCV7381C mode control functionality is optimized for nodes permanently connected to car battery.
It offers excellent EMC and ESD performance.

ON Semiconductor, LLCMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

Compliant with FlexRay Electrical Physical Layer Specification
Rev 3.0.1
FlexRay Transmitter and Receiver in Normal-power Modes for
Communication up to 10 Mbit/s
Support of 60 ns Bit Time
FlexRay Low-power Mode Receiver for Remote Wakeup Detection
Excellent Electromagnetic Susceptibility (EMS) Level over Full
Frequency Range. Very Low Electromagnetic Emissions (EME)
Bus Pins Protected against >10 kV System ESD Pulses
Safe Behavior under Missing Supply or No Supply Conditions
Interface Pins for a Protocol Controller and a Host
(TxD, RxD, TxEN, RxEN, STBN, BGE, EN, ERRN)
INH Output for Control of External Regulators
Local Wakeup Pin WAKE
TxEN Time-out
BGE Feedback
Supply Pins VBAT, VCC, VIO with Independent Voltage Ramp Up:
- VBAT Supply Parametrical Range from 5.5 V to 50 V
- VCC Supply Parametrical Range from 4.75 V to 5.25 V
- VIO Supply Parametrical Range from 2.3 V to 5.25 V
Compatible with 14 V and 28 V Systems
Operating Ambient Temperature -40°C to +150°C (T_{AMB_Class0})
Junction Temperature Monitoring with Two Levels
Increased Operating Junction Temperature
FlexRay Functional Classes
- Bus Driver Voltage Regulator Control
- Bus Driver Bus Guardian Interface
- Bus Driver Logic Level Adaptation
- Bus Driver Remote Wakeup
Automotive Qualification According to AECQ100