This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

MIC2506YM

Dual High-Side 1A Current Limitng Power Switch.

email Email: [email protected]
skype Skype: live:.cid.ab6b29428937b76
tel Tel: +852 95804164

MIC2506YM General Description

The MIC2505, MIC2505-1, MIC2505-2, and MIC2506 are single and dual integrated high-side power switches that consist of TTL compatible control/enable inputs, a charge pump, and protected N-channel MOSFETs. The MIC2505/6 family can be used instead of separate high-side drivers and MOSFETs in many low-voltage applications. The MIC2505/6 family controls voltages ranging from 2.7V to 7.5V. The MIC2505-series can deliver at least 2A continuous current while the MIC2506 can deliver at least 1A continuous current from each output. A slow turn-on feature prevents high inrush current when switching capacitive loads. The internal control circuitry is powered from the same 2.7V to 7.5V. Within the device’s input range, outputs can be forced higher than the input voltage when disabled. Multipurpose open-drain fault flag outputs indicate overcurrent limiting, open-load detection (except MIC2505-1 and -2 versions), thermal shutdown, or undervoltage lockout for each channel. Overcurrent limiting is internally fixed and requires no external components. Open-load detection is active when the switch is off. When off, a normal load pulls the output pin low. If the load is open, an optional, external, high-value resistor pulls the output pin high, triggering the fault flag. MIC2505-1 and -2 versions are tailored to Universal Serial Bus (USB) applications and do not include open-load detection. Thermal shutdown turns off the output if the die temperature exceeds approximately 135°C. If enabled, the switch automatically restarts when the temperature falls 10°C. Undervoltage lockout (UVLO) shuts off the output if the supply drops below 2.3V typical and reenables the output when the supply exceeds 2.5V typical.

mic2506ym mic2506ym

Key Features

    • Low MOSFET on resistance to 2.7V
    • 30mO typical at 5V (MIC2505-series)
    • 35mO typical at 3.3V (MIC2505-series)
    • 75mO typical at 5V (each MIC2506 output)
    • 80mO typical at 3.3V (each MIC2506 output)
    • 2.7V to 7.5V input
    • 110µA typical on-state supply current
    • 1µA typical off-state supply current
    • Output can be forced higher than input (off-state)
    • Current limit
    • Thermal shutdown
    • 2.5V undervoltage lockout (UVLO)
    • Open-load detection (MIC2505BN/M and MIC2506BN/M only)
    • Open-drain fault flag
    • 5ms (slow) turn-on and fast turnoff
    • Logic-level control/enable input
mic2506ym mic2506ym
mic2506ym mic2506ym

Specifications

Category Integrated Circuits (ICs)Power Management (PMIC)Power Distribution Switches, Load Drivers Series -
Switch Type General Purpose Number of Outputs 2
Ratio - Input:Output 1:2 Output Configuration High Side
Output Type N-Channel Interface On/Off
Voltage - Load 2.7V ~ 7.5V Voltage - Supply (Vcc/Vdd) Not Required
Current - Output (Max) 1A Rds On (Typ) 75mOhm
Input Type Non-Inverting Features Slew Rate Controlled, Status Flag
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount Base Product Number MIC2506
Product Category Power Switch ICs - Power Distribution Type High Side
Current Limit 1 A On Resistance - Max 125 mOhms
On Time - Max 2 ms Off Time - Max 20 us
Operating Supply Voltage 3 V to 7.5 V Minimum Operating Temperature - 40 C
Maximum Operating Temperature + 85 C Mounting Style SMD/SMT
Moisture Sensitive Yes Product Power Switches
Product Type Power Switch ICs - Power Distribution Factory Pack Quantity 95
Subcategory Switch ICs Supply Voltage - Max 7.5 V
Supply Voltage - Min 2.7 V Unit Weight 0.019048 oz

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method

hsbc
TT/Wire Transfer
paypal
Paypal
wu
Western Union
mg
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty Warranty
365-Day Product Quality Guarantee

365-Day Product

Quality Guarantee

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

More
L
L**y 09/29/2023

Well, i liked the goods and the delivery is fast, at work without complaints

3
M
M**a 12/11/2022

Excellent, thank you.

18
J
J**n 02/21/2022

Everything is as always on top! I order constantly from this seller. Delivery this time is delayed for a month, but this is the origins of our mail :)Huge +++ thank you!

16

Reviews

You need to log in to reply. Sign In | Sign Up

LT1640ALCS8#PBF

LT1640ALCS8#PBF

Analog Devices, Inc

LTC4259ACGW

LTC4259ACGW

Analog Devices

MAX16046ATN+

MAX16046ATN+

Analog Devices, Inc

SiP11206DQP-T1-E3

SiP11206DQP-T1-E3

Vishay Intertechnology, Inc

LP38501TS-ADJ/NOPB

LP38501TS-ADJ/NOPB

Texas Instruments, Inc

LTC3868EUH#PBF

LTC3868EUH#PBF

Analog Devices, Inc

UC2845D

UC2845D

Texas Instruments, Inc

ADP5310AREZN-R7

ADP5310AREZN-R7

Analog Devices, Inc

BTS660P-E3180A

SG7812AT/883B

TPS54232DR

TPS73501DRVR

TPS73501DRBR

UCC25600DR

LM3150MH/NOPB

TPS63031DSKT

TPS54140DGQR

TPS61175PWPR

TPS2553DBVT-1

TPS2553DBVT

LT4356HMS-3#TRPBF

XBP9B-DMUT-002

KFA5-SR2-EX2.W

JANTX2N2222AUB

CR330

HG1G-4VT22TF-B

LM324N

TLP281-4

Availability: 6744 PCS

+BOM
Qty. Unit Price Ext. Price
1+ $4.331 $4.33
10+ $3.784 $37.84
30+ $3.457 $103.71
95+ $3.080 $292.60
475+ $2.929 $1,391.28
950+ $2.860 $2,717.00

The prices below are for reference only.

INQUIRY NOW

Top Sellers

Inquiry Add To Bom