Payment Method
MIC184YMM
Dual LM75 Replacement.Dual LM75 Replacement.
-
Manufacturer:
-
Mfr.Part #:
MIC184YMM
-
Datasheet:
-
Sensor Type:
Digital, Local/Remote
-
Sensing Temperature - Local:
-55°C ~ 125°C
-
Sensing Temperature - Remote:
-55°C ~ 125°C
-
Output Type:
I²C/SMBus
-
EDA/CAD Models:
Availability: 6353 PCS
Please fill in the short form below and we will provide you the quotation immediately.
MIC184YMM General Description
The MIC184 is a versatile digital thermal supervisor capable of measuring temperature using either its own internal sensor or an inexpensive external sensor. A 2-wire serial interface is provided to allow communication with either I2C or SMBus masters. This device is a pin-for-pin and software compatible upgrade for the industry standard LM75.Additional features include remote temperature measurement capability, and interrupt status and mask bits in the chip's configuration register for software polling. The open-drain interrupt output pin can be used as either an overtemperature alarm or thermostatic control signal. Three programmable address pins permit users to multidrop up to 8 devices along the 2-wire bus, allowing simple distributed temperature sensing networks. Superior performance, low power and small size makes the MIC184 an excellent choice for the most demanding thermal management applications.
Key Features
- Measures local and remote temperatures
- Pin and software backward compatible to LM75
- 9-bit sigma-delta ADC
- 2-wire I2C/SMBus compatible interface
- Programmable thermostatic settings for either internal or external zone
- Open-drain comparator/interrupt output pin
- Interrupt mask and status bits
- Low-power shutdown mode
- Fail-safe response to diode faults
- 2.7V to 5.5V power supply range
- Up to 8 devices may share the same bus
- 8-Lead SOP and MSOP Packages
Specifications
Category | Sensors, TransducersTemperature SensorsAnalog and Digital Output | Series | - |
Sensor Type | Digital, Local/Remote | Sensing Temperature - Local | -55°C ~ 125°C |
Sensing Temperature - Remote | -55°C ~ 125°C | Output Type | I²C/SMBus |
Voltage - Supply | 2.7V ~ 5.5V | Resolution | 9 b |
Features | Output Switch, Shutdown Mode, Standby Mode | Accuracy - Highest (Lowest) | ±2°C (±3°C) |
Test Condition | 0°C ~ 100°C (-55°C ~ 125°C) | Operating Temperature | -55°C ~ 125°C |
Mounting Type | Surface Mount | Base Product Number | MIC184 |
Product Category | Board Mount Temperature Sensors | Configuration | Local, Remote |
Accuracy | +/- 2 C | Supply Voltage - Min | 2.7 V |
Supply Voltage - Max | 5.5 V | Interface Type | 2-Wire, I2C, SMBus |
Minimum Operating Temperature | - 55 C | Maximum Operating Temperature | + 125 C |
Shutdown | Shutdown | Mounting Style | SMD/SMT |
Moisture Sensitive | Yes | Operating Supply Current | 500 uA |
Pd - Power Dissipation | 30 mW | Product | Temperature Sensors |
Product Type | Temperature Sensor ICs | Factory Pack Quantity | 100 |
Subcategory | Sensors | Unit Weight | 0.013805 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 6353 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for MIC184YMM, guaranteed quotes back within 12hr.