This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MCP2562FDT-H/SN

High-speed CAN FD Transceiver with Standby Mode and VIO Pin.

Manufacturer:

MICROCHIP
Mfr.Part #:

MCP2562FDT-H/SN
Datasheet:

MCP2562FDT-H/SN Datasheet (PDF)
Series:

MCP2562
Type:

CAN Controller
Mounting Style:

SMD/SMT
Data Rate:

8 Mb/s
EDA/CAD Models:

Request Free CAD Models for MCP2562FDT-H/SN

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

MCP2562FDT-H/SN General Description

The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum propagation delay was improved to support longer bus length. The device meets the automotive requirements for CAN FD bit rates exceeding 5 Mbps, low quiescent current, electromagnetic compatibility (EMC) and electrostatic discharge (ESD). The device family members are MCP2561FD with SPLIT pin and MCP2562FD with VIO pin.

For 12V applications please consider the ATA6561

Key Features

Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements
AEC-Q100 Grade 0
Very Low Standby Current (5 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
Permanent Dominant Detection on TXD
Permanent Dominant Detection on Bus
Power-on Reset and Voltage Brown-Out Protection on VDD Pin
Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)
Protection Against High-Voltage Transients in Automotive Environments
Automatic Thermal Shutdown Protection
Suitable for 12V and 24V Systems
Radiated emissions @ 2 Mbps with Common Mode Choke (CMC)
DPI @ 2 Mbps with CMC
High ESD Protection on CANH and CANL, meeting IEC61000-4-2 up to ±14 kV
Available in PDIP-8L, SOIC-8L and 3x3 DFN-8L
Extended (E): -40°C to +125°C
High (H): -40°C to +150°C

Specifications

Product Category	CAN Interface IC	Series	MCP2562
Type	CAN Controller	Mounting Style	SMD/SMT
Data Rate	8 Mb/s	Number of Drivers	1 Driver
Number of Receivers	1 Receiver	Supply Voltage - Min	4.5 V
Supply Voltage - Max	5.5 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 150 C	Operating Supply Current	70 mA
ESD Protection	14 kV	Moisture Sensitive	Yes
Product Type	CAN Interface IC	Factory Pack Quantity	3300
Subcategory	Interface ICs	Unit Weight	0.019048 oz