Payment Method
MCP2562-E/MFVAO
Microchip Technology
-
Manufacturer: MICROCHIP
-
Mfr.Part #: MCP2562-E/MFVAO
-
Datasheet: MCP2562-E/MFVAO Datasheet (PDF)
-
Qualification: AEC-Q100
-
EDA/CAD Models: Request Free CAD Models for MCP2562-E/MFVAO
Availability: 9235 PCS
Please fill in the short form below and we will provide you the quotation immediately.
MCP2562-E/MFVAO General Description
The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device meets the automotive requirements for high-speed (1 Mb/s), low quiescent current, electromagnetic compatibility (EMC) and electrostatic discharge (ESD). The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin
Key Features
- Supports 1 Mb/s operation
- Implements ISO-11898-5 standard physical layerrequirements
- AEC-Q100 Grade 0
- Very low standby current (Typ: 5µA)
- VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
- SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
- CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
- Detection of ground fault; Permanent dominant detection on TXD, Permanent dominant detection on bus
- Power-on Reset and voltage brown-out protectionon VDD and VIO pin
- Protection against damage due to short-circuitconditions (positive or negative battery voltage)
- Protection against high-voltage transients in automotive environments
- Automatic Thermal Shutdown protection
- Suitable for 12V and 24V systems
- Up to 112 nodes can be connected
- High-noise immunity due to differential bus implementation
- High ESD protection on CANH and CANL, IEC61000-4-2 > 8kV
- Available in PDIP-8L, SOIC-8L and 3x3 DFN-8L.
- Temperature ranges; Extended (E): -40°C to +125°C, High (H): -40°C to +150°C
Specifications
Product Category | Microchip Technology | Qualification | AEC-Q100 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 9235 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for MCP2562-E/MFVAO, guaranteed quotes back within 12hr.
Top Sellers
-
ATSAMA5D27-WLSOM1
Microchip Technology, Inc
- Embedded Module ARM® Cortex®-A5 500MHz 256MB 8MB
-
KSZ8061RNBV
microchip
10/100 Base-T/TX Ethernet Transceiver with Quiet-WIRE(R).
-
KSZ8061MNXV
microchip
PHY 10Mbps/100Mbps 3.135V to 3.465V Automotive AEC-Q100 32-Pin WQFN EP Tray
-
ATZB-24-A2
Microchip Technology, Inc
Zigbee Modules - 802.15.4 ZigBit 2.4 GHz Dual Chip Antenna