Payment Method
MC100EP140DG
Phase-Frequency Detector, 3.3 V, ECL
-
Manufacturer:
-
Mfr.Part #:
MC100EP140DG
-
Datasheet:
-
Case Outline:
751-07
-
MSL Temp (°C):
260
-
Container Type:
REEL
-
EDA/CAD Models:
Availability: 5774 PCS
Please fill in the short form below and we will provide you the quotation immediately.
MC100EP140DG General Description
The MC100EP140 is a three state phase frequency-detector intended for phase-locked loop applications which require a minimum amount of phase and frequency difference at lock. Since the part is designed with fully differential gates, the noise is reduced throughout the circuit, especially at high speeds. The basic operation of a Phase/Frequency Detector (PFD) is to "compare" an incoming signal (feedback) to a set reference signal. When the Reference (R) and Feedback (FB) inputs are unequal in frequency and/or phase, the differential UP (U) and DOWN (D) outputs will provide pulse streams which when subtracted and integrated provide an error voltage for control of a VCO.
The device is packaged in a small outline, surface mount 8-lead SOIC package. The output of the EP140 is 400 mV, which allows faster switching time and greater bandwidth. This device can also be used in +3.3 V systems. For proper operation, the input edge rate of the R and FB inputs should be less than 5 ns.
More information on Phase Lock Loop operation and application can be found in AND8040.
Key Features
- 500 ps Typical Propagation Delay
- Maximum Frequency > 2.1 Ghz Typical
- Fully Differential Internally
- Advanced High Band Output Swing of 400 mV
- Transfer Gain: 1.0 mV/Degree at 1.4 GHz, 1.2 mV/Degree at 1.0 GHz
- Rise and Fall Time: 100 ps Typical
- The 100 Series Contains Temperature Compensation
- PECL Mode Operating Range: VCC = 3.0 V to 3.6 V with VEE = 0 V
- NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -3.6 V
- Open Input Default State
- Pb-Free Packages are Available
Specifications
Status | Active | Case Outline | 751-07 |
MSL Temp (°C) | 260 | Container Type | REEL |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
MC100EP140DG Datasheet PDF
MC100EP140DG PDF Preview
Availability: 5774 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for MC100EP140DG, guaranteed quotes back within 12hr.