This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MAX489ECPD+

1/1 Transceiver Full RS422, RS485 14-PDIP

Manufacturer:

ADI
Mfr.Part #:

MAX489ECPD+
Datasheet:

MAX489ECPD+ Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Transferred
Pin Count:

14
Reach Compliance Code:

compliant
EDA/CAD Models:

Request Free CAD Models for MAX489ECPD+

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

MAX489ECPD+ General Description

The MAX481E, MAX483E, MAX485E, MAX487E-MAX491E, and MAX1487E are low-power transceivers forRS-485 and RS-422 communications in harsh environments.Each driver output and receiver input is protectedagainst ±15kV electro-static discharge (ESD) shocks,without latchup. These parts contain one driver and onereceiver. The MAX483E, MAX487E, MAX488E, andMAX489E feature reduced slew-rate drivers that minimizeEMI and reduce reflections caused by improperly terminatedcables, thus allowing error-free data transmissionup to 250kbps. The driver slew rates of the MAX481E,MAX485E, MAX490E, MAX491E, and MAX1487E are notlimited, allowing them to transmit up to 2.5Mbps.

Key Features

For Fault-Tolerant Applications:
MAX3430: ±80V Fault-Protected, Fail-Safe, 1/4-Unit Load, +3.3V, RS-485 TransceiverMAX3080-MAX3089: Fail-Safe, High-Speed(10Mbps), Slew-Rate-Limited, RS-485/RS-422Transceivers
For Space-Constrained Applications:
MAX3460-MAX3464: +5V, Fail-Safe, 20Mbps,Profibus, RS-485/RS-422 TransceiversMAX3362: +3.3V, High-Speed, RS-485/RS-422Transceiver in a SOT23 PackageMAX3280E-MAX3284E: ±15kV ESD-Protected,52Mbps, +3V to +5.5V, SOT23, RS-485/RS-422True Fail-Safe ReceiversMAX3030E-MAX3033E: ±15kV ESD-Protected,+3.3V, Quad RS-422 Transmitters
For Multiple Transceiver Applications:
MAX3293/MAX3294/MAX3295: 20Mbps, +3.3V,SOT23, RS-485/RS-422 Transmitters
For Fail-Safe Applications:
MAX3440E-MAX3444E: ±15kV ESD-Protected,±60V Fault-Protected, 10Mbps, Fail-SafeRS-485/J1708 Transceivers
For Low-Voltage Applications:
MAX3483E/MAX3485E/MAX3486E/MAX3488E/MAX3490E/MAX3491E: +3.3V Powered, ±15kVESD-Protected, 12Mbps, Slew-Rate-Limited,True RS-485/RS-422 Transceivers

Application

Industrial-Control Local Area Networks
Level Translators
Low-Power RS-422 Transceivers
Low-Power RS-485 Transceivers
Transceivers for EMI-Sensitive Applications

Specifications

Pbfree Code	Yes	Part Life Cycle Code	Transferred
Pin Count	14	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.39.00.01
Additional Feature	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	Differential Output	YES
Driver Number of Bits	1	High Level Input Current-Max	0.000002 A
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER	Interface IC Type	LINE TRANSCEIVER
Interface Standard	EIA-422; EIA-485	JESD-30 Code	R-PDIP-T14
JESD-609 Code	e3	Length	19.05 mm
Moisture Sensitivity Level	1	Number of Functions	1
Number of Terminals	14	Operating Temperature-Max	70 °C
Operating Temperature-Min		Out Swing-Min	1.5 V
Output Low Current-Max	0.004 A	Output Polarity	COMPLEMENTARY
Peak Reflow Temperature (Cel)	260	Qualification Status	Not Qualified
Receive Delay-Max	2000 ns	Receiver Number of Bits	1
Seated Height-Max	4.572 mm	Supply Current-Max	0.25 mA
Supply Voltage-Max	5.25 V	Supply Voltage-Min	4.75 V
Supply Voltage-Nom	5 V	Surface Mount	NO
Technology	CMOS	Temperature Grade	COMMERCIAL
Terminal Finish	MATTE TIN	Terminal Form	THROUGH-HOLE
Terminal Pitch	2.54 mm	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	30	Transmit Delay-Max	2000 ns
Width	7.62 mm	Series	-
Type	Transceiver	Protocol	RS422, RS485
Number of Drivers/Receivers	1/1	Duplex	Full
Receiver Hysteresis	70 mV	Data Rate	250kbps
Voltage - Supply	4.75V ~ 5.25V	Operating Temperature	0°C ~ 70°C
Mounting Type	Through Hole	Base Product Number	MAX489