This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MAX3301EETJ

USB Transceiver 1TR 12Mbps 32-Pin TQFN EP

Manufacturer: Maxim Integrated
Mfr.Part #: MAX3301EETJ
Datasheet: MAX3301EETJ Datasheet (PDF)
Type: Transceiver
Protocol: USB 2.0
Number of Drivers/Receivers: 1/1
Duplex: Full
EDA/CAD Models: Request Free CAD Models for MAX3301EETJ

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

MAX3301EETJ General Description

The MAX3301E/MAX3302E fully integrated USB On-the-Go (OTG) transceivers and charge pumps allow mobile devices such as PDAs, cellular phones, and digital cameras to interface directly with USB peripherals and each other without the need of a host PC. Use the MAX3301E/MAX3302E with an embedded USB host to directly connect to peripherals such as printers or external hard drives. The MAX3301E/MAX3302E integrate a USB OTG transceiver, a VBUS charge pump, a linear regulator, and an I2C-compatible, 2-wire serial interface. An internal level shifter allows the MAX3301E/MAX3302E to interface with +1.65V to +3.6V logic supply voltages. The MAX3301E/MAX3302E's OTG-compliant charge pump operates with +3V to +4.5V input supply voltages, and supplies an OTG-compatible output on VBUS while sourcing more than 8mA of output current. The MAX3301E/MAX3302E enable USB OTG communication from highly integrated digital devices that cannot supply or tolerate the +5V VBUS levels that USB OTG requires. The device supports USB OTG session-request protocol (SRP) and host-negotiation protocol (HNP). The MAX3301E/MAX3302E provide built-in ±15kV electrostatic-discharge (ESD) protection for the VBUS, ID_IN, D+, and D- terminals. The MAX3301E/MAX3302E are available in 25-bump chip-scale (UCSP), 25-bump WLP package, 28-pin TQFN, and 32-pin TQFN packages and operate over the extended -40°C to +85°C temperature range.

Maxim IntegratedMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

USB 2.0-Compliant Full-/Low-Speed OTG Transceivers
Ideal for USB On-the-Go, Embedded Host, or Peripheral Devices
BUS
Charge Pump for V
BUS
Internal V
BUS
Internal Switchable Pullup and Pulldown Resistors for Host/Peripheral Functionality
I2C Bus Interface with Command and Status Registers
Linear Regulator Powers Internal Circuitry and D+/D- Pullup Resistors
Supports SRP and HNP

Application

Digital Cameras
Mobile Phones
MP3 Players
PDAs

Specifications

Category	Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers	Mfr	Analog Devices Inc./Maxim Integrated
Series	-	Package	Tube
Product Status	Active	Type	Transceiver
Protocol	USB 2.0	Number of Drivers/Receivers	1/1
Duplex	Full	Data Rate	1.5Mbps
Voltage - Supply	3V ~ 4.5V	Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount	Supplier Device Package	32-TQFN (5x5)
Base Product Number	MAX3301