This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LTC4307IDD-1

I2C Buffer 2.5V/3.3V 8-Pin DFN EP

Manufacturer:

Analog Devices, Inc
Mfr.Part #:

LTC4307IDD-1
Datasheet:

LTC4307IDD-1 Datasheet (PDF)
Package/Case:

DFN8
Product Type:

Drivers
EDA/CAD Models:

Request Free CAD Models for LTC4307IDD-1

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LTC4307IDD-1 General Description

The LTC4307 hot swappable, 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. The LTC4307 provides bidirectional buffering, keeping the backplane and card capacitances isolated. Low offset and high VOL tolerance allows multiple devices to be cascaded on the clock and data busses. If SDAOUT or SCLOUT are low for 30ms, the LTC4307 will automatically break the bus connection. At this time the LTC4307 automatically generates up to 16 clock pulses on SCLOUT in an attempt to free the bus. A connection will resume if the stuck bus is cleared.

During insertion, the SDA and SCL lines are pre-charged to 1V to minimize bus disturbances. When driven high, the ENABLE input allows the LTC4307 to connect after a stop bit or bus idle. Driving ENABLE low breaks the connection between SDAIN and SDAOUT, SCLIN and SCLOUT. READY is an open-drain output which indicates that the backplane and card sides are connected.

Analog Devices, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

Bidirectional Buffer with Stuck Bus Recovery
60mV Buffer Offset Independent of Load
30ms Stuck Bus Timeout
Compatible with Non-Compliant VOL I2C Devices
Prevents SDA and SCL Corruption During Live Board Insertion and Removal from Backplane
Isolates Input SDA and SCL Line from Output
Compatible with I2C™, I2C Fast Mode and SMBus
READY Open-Drain Output
1V Precharge on All SDA and SCL Lines
High Impedance SDA, SCL Pins for VCC = 0V
Small 8-Lead (3mm × 3mm) DFN and 8-Lead MSOP Packages