This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LT1168CN8#PBF

Low Power, Single Resistor Gain Programmable, Precision Instrumentation Amplifier

Manufacturer:

Analog Devices, Inc
Mfr.Part #:

LT1168CN8#PBF
Datasheet:

LT1168CN8#PBF Datasheet (PDF)
Amplifier Type:

Instrumentation
Number of Circuits:

1
Slew Rate:

0.5V/µs
Gain Bandwidth Product:

400 kHz
EDA/CAD Models:

Request Free CAD Models for LT1168CN8#PBF

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LT1168CN8#PBF General Description

The high accuracy of the LT1168 is due to a 20ppm maximum nonlinearity and 0.4% max gain error (G = 10). Previous monolithic instrumentation amps cannot handle a 2k load resistor whereas the nonlinearity of the LT1168 is specified for loads as low as 2k. The LT1168 is laser trimmed for very low input offset voltage (40µV max), drift (0.3µV/°C), high CMRR (90dB, G = 1) and PSRR (103dB, G = 1). Low input bias currents of 250pA max are achieved with the use of superbeta processing. The output can handle capacitive loads up to 1000pF in any gain configuration while the inputs are ESD protected up to 13kV (human body). The LT1168 with two external 5k resistors passes the IEC 1000-4-2 level 4 specification.

Analog Devices, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

Supply Current: 530µA Max
Meets IEC 1000-4-2 Level 4 (±15kV) ESD Tests with Two External 5k Resistors
Single Gain Set Resistor: G = 1 to 10,000
Gain Error: G = 10, 0.4% Max
Input Offset Voltage Drift: 0.3µV/°C Max
Gain Nonlinearity: G = 10, 20ppm Max
Input Offset Voltage: 40µV Max
Input Bias Current: 250pA Max
PSRR at AV =1: 103dB Min
CMRR at AV = 1: 90dB Min
Wide Supply Range: ±2.3V to ±18V
1kHz Voltage Noise: 10nV/√Hz
0.1Hz to 10Hz Noise: 0.28µV_P-P
Available in 8-Pin PDIP and SO Packages

Application

Bridge Amplifiers
Strain Gauge Amplifiers
Thermocouple Amplifiers
Differential to Single-Ended Converters
Differential Voltage to Current Converters
Data Acquisition
Battery-Powered and Portable Equipment
Medical Instrumentation
Scales

Specifications

Category	Integrated Circuits (ICs)LinearAmplifiersInstrumentation, OP Amps, Buffer Amps	Series	-
Amplifier Type	Instrumentation	Number of Circuits	1
Output Type	-	Slew Rate	0.5V/µs
Gain Bandwidth Product	400 kHz	Current - Input Bias	80 pA
Voltage - Input Offset	20 µV	Current - Supply	350µA
Current - Output / Channel	32 mA	Voltage - Supply Span (Min)	4.6 V
Voltage - Supply Span (Max)	36 V	Operating Temperature	0°C ~ 70°C
Mounting Type	Through Hole	Base Product Number	LT1168